Geo RL-70 Operating Instructions

Operating Instructions

Präzisions-Laser PL-70
Rotary Laser RL-70
Precision Laser PL-74
Congratulations on your new GEO laser
This operating instructions contain enclosed in addition to
information on how to use the laser important safety
information.
Please note: First read the safety instructions on the
supplement page 1 - 3 and then the operating
instructions carefully before using the laser.
Date 07/2012 4 - 9
1.
Description
The rotary laser RL-70 and the precision laser PL-74 are
all around lasers for horizontal use capable of
electronic self-levelling over two axes.
They emit a laser beam which
turns into a light plane as
it rotates.
1.1 Robust Light Metal Housing
Plastic-coated, swept with nitrogen,
100 % watertight.
1.2 Laser Warning Sign
Laser class 2, < 1 mW
1.3 Charging Socket
Behind the dust guard cap.
1.4 Bulging Ground Area, niro St.
Protects against damages of coat and
guarantees a secure stand.
Central fastening thread 5/8".
= 1.5 ON/OFF Button
By pressing theON/OFF button, the laser is switched
on. After the levelling phase the laser beam and the
right LED stop blinking. If this does not happen, the
device must be moved into the levelling range by tilting
it forwards. The rotor rotates with max. 800 rpm.
To switch off the device, press the ON/OFF button until
the right LED switches over to orange.
Subject to change 5 - 9
1.6 Box Level
Aid for set-up.
1.7 Handle
For easy handling, safe transport and
simple set-up.
1.8 Identification
Address of manufacturer, laser power,
type designation, power supply,
serial number.
1.9 LED Display
constantly: ready for work
blinking fast: levelling not yet finished
blinking slowly: out of self-levelling range
rhythmically with breaks:
automatical laser cut-off (see 3.)
out of temperature range (> 49°)
green light: power supply correct
red light: charge battery
2. Start Up 1 - 2 - 3
Set up laser, switch on, measure.
6 - 9