AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, 14. DAMAGE REQUIRING SERVICE – The product should be serviced by qualified SHALL BE PLACED ON THE APPARATUS. service personnel when: L502 & L802 Owner's Manual 10168 Harbinger Lvl L502 802 Manual.indd 2 7/8/14 3:15 PM...
Troubleshooting WELCOME Congratulations on your recent purchase of a new Harbinger LvL Series mixer. They are the perfect choice for bands or individual musicians who are looking for great-sounding mixes, live performance durability and audio specs that studio users demand.
1. Keep the Main Mix and Control Room levels up. PEAK light flashes red, turn the gain back down a bit. 2. Turn down the Level control for stereo channel 3-4 (2-3 on L502). 8. Slowly turn up the PHONES level while speaking into the microphone.
Page 5
5. If you’re using a condenser microphone, switch on the PHANTOM POWER function. If you’re using a dynamic mic, or don’t know which type you’re using, leave phantom power off. *L802 ONLY L502 & L802 Owner's Manual 10168 Harbinger Lvl L502 802 Manual.indd 5 7/8/14 3:15 PM...
Aux*: A post-fader auxiliary send. It sends the channel to the Aux RCA Input: An unbalanced input for a mixdown recorder, Aux Send output. MP3 player, computer or other playback source. *L802 ONLY L502 & L802 Owner's Manual 10168 Harbinger Lvl L502 802 Manual.indd 6 7/8/14 3:15 PM...
Page 7
Aux signals to Control Room*/Phones level: Controls the level going to the pass to the Aux Output. Control Room* outputs and the Phones outputs. Phantom Power: Sends (L802 +48V, L502 +15V) phantom power to the XLR inputs. L802 L802 *L802 ONLY L502 &...
5 & 8-CHANNEL MIXERS INPUT TYPES This chapter will review the types of inputs on the L502/802 mixer and explain each of their features. CHANNELS 1-4: MIC/LINE INPUTS MICROPHONE INPUT (MIC) microphone. Set the gain so that the level on each channel is roughly the same, then use the Level controls to set the This XLR connector will accept virtually any professional microphone.
Page 9
Tip: You can use the pan control to create two mono mixes The aux send can be sent to different parts of the mixer, depending from the L502/802. This might be more useful than a on what application you need it for. It always shows up at the Aux...
5 & 8-CHANNEL MIXERS OUTPUT TYPES This chapter explains each of the outputs on the Harbinger L502/802 mixer and their level controls. MAIN OUTS when preparing a headphone mix for an artist. The Main Outs are line outputs. They will work with either balanced PHONES or unbalanced cables.
EQ curve that looks like a hill (increase) or a interference. (See Balanced above.) valley (decrease). (Compare to Shelving Equalizer Control; see pages 8-9 for more information.) L502 & L802 Owner's Manual 10168 Harbinger Lvl L502 802 Manual.indd 11 7/8/14 3:15 PM...
5 & 8-CHANNEL MIXERS BLOCK DIAGRAM - L502 LEFT MAIN BUS RIGHT MAIN BUS L502 & L802 Owner's Manual 10168 Harbinger Lvl L502 802 Manual.indd 13 7/8/14 3:15 PM...
Page 14
5 & 8-CHANNEL MIXERS BLOCK DIAGRAM - L802 LEFT MAIN BUS RIGHT MAIN BUS AUX BUS L502 & L802 Owner's Manual 10168 Harbinger Lvl L502 802 Manual.indd 14 7/8/14 3:15 PM...
(2) year warranty period. Some Harbinger provides, to the original purchaser, a two (2) year limited states do not allow limitation on how long an implied warranty lasts, so the warranty on materials and workmanship on all Harbinger cabinets, above limitation may not apply to you.