Resource Storage; Micr Toner Cartridge - Source ST9715 Secure MICR User Manual

Use of the "MP" designate symbol, to identify the line as MicroPrint, is optional. The ST
MicroPrint font only contains alphanumeric characters. Punctuation marks, special
symbols and spaces are ignored by the font's design and do not print.

Resource Storage

The Flash memory in the printer contains five Source Technologies' secured fonts but
can be loaded with additional resources for check or non-check printing. The Flash can
be loaded with signature fonts, overlay Macros, or other custom resources limited only
by the available space. Flash memory in the ST9712 is read/write password protected.
To load additional resources to Flash requires the proper PJL commands to unlock the
Flash memory device. This will be detailed in Chapter 6.
Storing resources (fonts, Macros, etc.) in RAM is also an option. Resources in RAM are
deleted when the printer is powered off and cannot be password protected in the printer.

MICR Toner Cartridge

When a MICR toner cartridge and MICR imaging unit are installed the following occurs:
Control of image density or print density and fusing temperatures are set to
optimum levels for MICR printing.
When the PJL "MICRJOB" command is sent, the following occurs:
1. The printer forces internal copies to 1. Downloaded copy commands are
ignored.
2. Automatic reprint of jammed documents is disabled, forcing the application to
reprint any jammed documents. This provides an audit trail to the application
of the jam event.
3. The printer checks for the presence of MICR toner cartridge and Imaging Unit
and will issue a message "Install MICR Cartridge" to the operator panel if not
presently installed.
Source Technologies
ST9715 Secure MICR Printer User's Guide
18
MICR Features | 5