Bosch HBL 73 Service Manual page 38

ELETTRODOMESTICI
VIA CHECCHI 98
I 21013 GALLARATE
ITALY
After a system reset, the following writings are displayed:
They indicate:
1.
The SW flash program code V0515.
2.
The EEPROM file number C0047, whereas the C red letter indicates the oven model (A, B, E, F for the single oven, C, D, G, H
for the double oven).
3.
The last saved fault number, whereas F000 means no faults saved.
4.
C2K2EAC means Copyright 2002 Emerson Appliance Controls.
The oven provides a 208V power supply option, for areas where the standard 240V is not available. First connect the oven to power
then, to access this option, follow the procedure below:
240V/208V POWER SELECTION:
1. Open the oven door (upper oven for double).
2. Turn the knob 6 detents CW.
3. Turn the knob 9 detents CCW.
4. Press [Start] key.
5. 240 SELECTED is displayed (or 208 SELECTED).
6. Press [Cooking Mode] key to change selection.
7. Touch [Start] key to confirm the new selection.
Tuesday, June 18, 2002
BOSCH 700 SERIES:
SERVICE INSTRUCTIONS FOR OVEN TESTING AND BASIC TROUBLESHOOTING
POWER SUPPLY SELECTION
V0515 C0047
F000 C2K2EAC
Page 7 of 28