Sony STR-DG820 Service Manual page 8

STR-DG820
Name Function
DISC SKIP Press to skip disc of the CD
player, VCD player, DVD
player, or MD deck (multi-
disc changer only).
RETURN/ Press to
– return to the previous menu.
EXIT
– exit the menu while the
menu or on-screen guide of
the VCD player, LD player,
DVD player, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or satellite tuner
is displayed on the TV
screen.
To return to the previous
menu of Sony TV, press TV
( ) and then press
RETURN/EXIT
DISPLAY Press to select information
displayed on the display
window or TV screen of the
VCR, VCD player, LD player,
DVD player, CD player, MD
deck, Blu-ray disc recorder,
PSX, satellite tuner, DVD/
VHS COMBO, or DVD/HDD
COMBO.
To select information of Sony
TV, press TV (
press DISPLAY.
INPUT MODE Press AMP (
INPUT MODE to select the
input mode when the same
components are connected to
both digital and analog jacks.
AUTO CAL Press to activate the Digital
Cinema Auto Calibration
function.
2CH/
Press to select sound field
or to switch the audio of the
A.DIRECT
selected input to analog signal
without any adjustment.
Input buttons Press one of the buttons to
select the component you
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components as follows.
You can program the remote
to control non-Sony
components following the
steps in "Programming the
remote".
8
Name
.
Numeric
buttons
(number 5
) and then
), then press
ENT/MEM
Function
Button Assigned Sony
component
VIDEO 1 VCR (VTR mode 3)
VIDEO 2 VCR (VTR mode 2)
BD Blu-ray disc player
DVD DVD player
SAT Satellite tuner
TV TV
SA-CD/CD Super Audio CD/
CD player
TUNER Built-in tuner
DMPORT DIGITAL MEDIA
PORT adapter
XM XM Mini-Tuner and
Home Dock
(US, Canadian models)
Press SHIFT ( ) and then
press numeric buttons to
b)
– preset/tune to preset
)
stations.
– select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
– select channel numbers of
the VCR, satellite tuner,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO, or
DVD/HDD COMBO.
Press TV ( ) and then press
the numeric buttons to select
the TV channels.
Press SHIFT ( ) and then
press ENT/MEM to enter the
value after selecting a
channel, disc or track using
the numeric buttons of the
VCR, CD player, VCD
player, LD player, MD deck,
DAT deck, tape deck, satellite
tuner, Blu-ray disc recorder,
or PSX.
To enter the value of Sony
TV, press TV ( ) and then
press ENT/MEM.
Press SHIFT ( ) and then
press ENT/MEM to store a
station during tuner operation.
Name Function
CLEAR/>10 Press SHIFT (
press CLEAR/>10 to clear a
mistake when you press the
incorrect numeric button of
the DVD player, Blu-ray disc
recorder, PSX, satellite tuner,
DVD/VHS COMBO, or
DVD/HDD COMBO.
Press SHIFT (
press CLEAR/>10 to select
track numbers over 10 of the
CD player, VCD player, LD
player, MD deck, tape deck,
TV, VCR, or satellite tuner.
-/--
Press SHIFT (
press -/-- to select the channel
entry mode, either one or two
digit of the VCR or satellite
tuner.
To select the channel entry
mode of the TV, press TV
( ) and then press -/--.
SHIFT
Press to light up the buttons. It
changes the remote button
function to activate the
buttons with pink printing.
THEATER Press to enjoy optimal image
suited for movies and to
output the sound from the
speakers connected to this
receiver automatically.
Note
This button will only function
if your TV is compatible with
Theater Mode. Refer to the
operating instructions
supplied with the TV for
details.
RM SET UP
Press to set up the remote.
a)
This button is also available for DIGITAL MEDIA
PORT adapter operation. For details on the
function of the button, refer to the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
b)
The number 5/SAT, TV CH +/PRESET + and
CATEGORY MODE (US, Canadian models)
buttons have tactile dots.
Use the tactile dots as references when operating
the receiver.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
) and then
) and then
) and then
/