Advertisement
is the newly set one.
S Se et tt ti in ng
N Ne et tw wo or rk
6 6. .5
5
g
o of
f
3 3G
G
When the user inserts the 3G usb dongle into the USB interface of the router, the router will
automatically begin dialing up progress.
During 3G dial-up, some configuration information needs to be invoked. Please configure such
information in 3G configuration page before the 3G wireless network card is inserted.
Click "3G" icon to enter the 3G setting interface. During dial-up settings, select the dial mode. Enter
the dial parameters provided by 3G ISP and click "OK". The default mode is automatic identification model,
i.e. plug and play and does not need to be changed.
Normally, if SIM card in the 3G usb dongle is provided by ISP of Chinese mainland, so it is not
necessary to change settings in the 3G configuration page. See the figure below:
The default dial parameter of such machine only applies to the 3G operators in Chinese mainland.
For Hong Kong, Taiwan and other countries, the parameters provided by the local ISP will prevail.
Therefore, users not from Chinese mainland need to set the dial parameters on the 3G setting interface
from "default" to "user-defined". Then they should, on the displayed setting interface, continue to fill out
information such as the dial number, APN user name and password provided by the local ISP, and finally
click "Ok" to finish the settings. See the figure below:
In general, the user only needs to select "Auto Detect" as the model of USB 3G dongle on the interface
shown in the figure above, to automatically set information such as dial number, APN user name and
password. In this way, you only need to connect the 3G network card and USB interface of router to finish
3G dial-up.
Note:
k
P Pa ar ra am me et te er
r
- 10 -
Advertisement
