LedGlow Advanced 3 Million Wireless USB Truck Underbody Kit Installation Instructions Manual

Advertisement

Advanced 3 Million Wireless USB Truck Underbody Kit
Warning:
Please check your state and local laws before installing this LED underbody kit. Every state has different policies and procedures in
place regarding aftermarket vehicle accessories. LEDGlow is not responsible for any fines that you may receive while using this underbody kit.
This kit is for off road use only.
Warning:
The installation of this kit is recommended to be installed by a licensed professional. The improper installation of this kit will void
all warranties.
The control box that is used to power the underbody tubes must be installed in a dry location! Having this part exposed to water or the
elements will cause the kit's controller to fail. Any water damage or corrosion to this part will VOID all warranties.
PLEASE READ THE FOLLOWING INSTRUCTIONS THOROUGHLY BEFORE INSTALLING AND OPERATING THIS LED
UNDERBODY KIT.
Truck Underbody Kit Includes:
(2) 48 Inch Tubes
(2) 36 Inch Tubes
(2) 24 Inch Tubes
(1) Control Box
(1) USB Hub

Underbody Kit Installation:

1.
Arrange the tubes out on the ground and test the kit to ensure proper functionality before installing.
2.
Before mounting the underbody tubes, please refer to the schematic below. The underbody tubes on this kit must be
installed in a specific way. This ensures all lighting patterns are properly synchronized and displayed correctly.
Note: The tubes can be plugged into any of the ports on the USB hub and will not affect the patterns.
3.
Optional: Raise and support the vehicle.
(1) Wireless Remote
(14) Mounting Brackets
(25) Zip Ties
(30) Large Screws

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Advanced 3 Million Wireless USB Truck Underbody Kit and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LedGlow Advanced 3 Million Wireless USB Truck Underbody Kit

  • Page 1 Please check your state and local laws before installing this LED underbody kit. Every state has different policies and procedures in place regarding aftermarket vehicle accessories. LEDGlow is not responsible for any fines that you may receive while using this underbody kit.
  • Page 2 12 volt source, the underbody kit will remember the previous color and pattern it was on prior to powering the vehicle down. You can also power this kit directly from your vehicle’s fuse box by using LEDGlow’s Expandable Circuit that is available at www.LEDGlow.com...
  • Page 3 Note: The control box features a built in sound activation mode that will pick up the vibrations from the music playing inside of your vehicle. Turning this mode ON and OFF is explained in the “Using the Control Box” section of these instructions below. Using the Control Box Turning the Kit ON and OFF Using the Control Box...
  • Page 4  P2 Button and Display Pressing the P2 button allows you to change the various options within the selected pattern.  Press and hold this button for 2 seconds to activate. Release this button when the number “1” flashes in the P2 position on the display.
  • Page 5  Setting the Kit to a Solid Color and Creating Custom Solid Colors Setting the Kit to a Solid Color Mode  Press the P1 button to your desired preset number.  Once you have selected your desired preset position, press and hold the P2 button until the “1” flashes on the control box display.
  • Page 6 For a period of one (1) year from the date of purchase, at no charge to the Purchaser, LEDGlow will repair or replace this Product if it is determined by LEDGlow to be defective. After the warranty period, the Purchaser must pay all charges for parts and labor.

Table of Contents