Table of Contents
Advertisement
Quick Links
TELIKOU
Intercom System
WTI-100 Simplex wireless
Interface
Instruction Manual
©
2006 TELIKOU Systems
All Rights Reserved
www.telikou.com
While TELIKOU makes every attempt to maintain the accuracy of the information contained in
its product manuals, the information is subject to change without notice.
Advertisement
Table of Contents
Related Manuals for Telikou WTI-100
Summary of Contents for Telikou WTI-100
-
Page 1: Intercom System
Intercom System WTI-100 Simplex wireless Interface Instruction Manual © 2006 TELIKOU Systems All Rights Reserved www.telikou.com While TELIKOU makes every attempt to maintain the accuracy of the information contained in its product manuals, the information is subject to change without notice. - Page 2 II. Equipments connection 1. Connect To 2-Wire System By 2 core with shield audio cable. This 2-wire connector (18) is used to connect WTI-100 to any intercom channel of 2-wire main station. Set 2-wire/4-wire selection switcher (switcher 11) to ―2-wire‖ position. Connector (18) is a pair of loop through XLR-3 connectors.
- Page 3 7. Press ―Talk‖ button on main station (If main station has no TALK-Call function, ―Talk‖ button and ―Call‖ button at same time). The transmit indication LED4 lights red on WTI-100 front panel. At this time, all the walkie talkie at same channel can hear the audio from main station.
- Page 4 TELIKOU WTI-100 Simplex Wireless Main Station 2. Transmit level Audio signal from wired main station is sent to WTI-100 through connector (17) or (18). It is transmit by WTI-100. Adjust transmit level adjustment (8), make transmit level indication LED (7) lights constant green. If LED lights red, it means transmit level is over. But a short red flash is allowed.
- Page 5 TELIKOU WTI-100 Simplex Wireless Main Station DIMENSION: 19” (W) x1.75” (H) x9.48”(D), 482mm x 44.5mm x 241mm WEIGHT: 2.6kg...
Need help?
Do you have a question about the WTI-100 and is the answer not in the manual?
Questions and answers