Datavideo wr 400 Manual

Using the optional Bluetooth Remote Control

This remote is designed for use with Android™ and iOS/apple™ devices.
It is always best to charge the remote for at least an hour before a prompting
session.
Plug the USB charging cable into a free USB A slot on your desktop computer and
connect the remote control to the charger cable.
The DV Prompter app will display RECHARGE BATTERY in the bottom right hand corner of the
application window when the battery is running low in the Bluetooth remote control.

How to pair the Bluetooth remote control

1. Ensure the Bluetooth remote has been charged fully beforehand.
2. Go in to the settings menu on your phone or tablet device.
3. Go to the Bluetooth settings and turn Bluetooth On and ensure your device is visible.
4. Press and hold the green button on the remote for 1 to 2 seconds until the LED starts
flashing Green.
5. You should then see DV Prompter appear on the handset or tablet device when searching for
nearby Bluetooth devices.
6. Tap on the DV Prompter label to start the pairing process with the remote control.
7. The tablet or mobile device should recognise the remote as a Bluetooth keyboard type device.
If a message says that you are unsuccessful in pairing the devices then reset the remote. To reset the
Bluetooth remote press and hold the green button until the LED flashes red/amber on the remote.
Then repeat the pairing process as above. Once paired for the first time the mobile device or tablet
will then remember the Bluetooth remote making later pairing attempts easier.

How to set up the App for the Bluetooth remote control

1. Open the DV Prompter app on the phone or tablet device and go in to Settings.
2. Scroll down to and tap the Remote option.
3. Select the Bluetooth option and your control is now ready to use.
4. Tap on the back symbol
5. Tap on the prompting document you wish to use.
6. Tap on the Start Prompt button.

How to charge the Bluetooth remote control

When the remote is charging you will see a flashing red LED light,
this will stop flashing once it is fully charged.

button to return to the DV Prompter app documents list.