Installing In Silent Mode - Sun Microsystems GlassFish Enterprise Server Installation Manual

updatetool.Configuration.ALLOW_UPDATE_CHECK=true
Change value to false if you do not want Update Tool notifications.
updatetool.Configuration.BOOTSTRAP_UPDATE=true
Change value to false if you do not want to install the standalone Update Tool.
updatetool.Configuration.PROXY_HOST=
Assign a name to the proxy host.
updatetool.Configuration.PROXY_PORT=
Assign a port number to the proxy host.
Note –
Doing so will cause problems with the installation program.

Installing in Silent Mode

The non-interactive installation program reads the specified answer file, checks for adequate
disk space, and installs Enterprise Server based on the data in the answer file.
▼
To Install Using Silent Mode
Create the answer file as described in
Before You Begin
Verify that the parameters in the answer file are set to the values that you want to use for silent
installation.
Navigate to the directory that contains the self-extracting installer file and the installation
1
answer file.
From the command line, type:
2
self-extracting-file-name -a answer-file -s
self-extracting-file-name is the name of the file that you downloaded during
Installation Answer File" on page
file.
-a specifies the name of the answer-file. If you do not include a path to the file, the file is created
under the directory from which the installation program is run.
-s specifies running in silent mode.
For example:
sges-v3-unix.sh -a v3-answer -s
When the prompt is returned, the silent installation is complete and the installation
components are installed on your system.
Chapter 1 • Installing Sun GlassFish Enterprise Server v3
Parameters not listed are system specific. Do not change system-specific parameters.
"To Create the Installation Answer File" on page
18. Ensure that you provide the complete path to the answer
Using Enterprise Server Silent Mode Installation
"Creating the
18.
23