E-fly ETB41 Operating Manual page 3

Thank you for purchasing the E-Fly ETB41-2.4GHz Digital Proportional Radio
Control System. Before you operate this unit, please read and keep this manual
carefully. Please comply the proper procedures strictly, user must be
responsible for the damages of radio system and model or other loss caused by
incorrect operation.
Transmitter E-FLY ETB41-2.4GHz 1 pes
Receiver E-FLY ER61-2.4GHz 1 pes
Servo AS-1 00 (9 gram) 3pcs
Simulator cable 1 pes
Radio neck strap
(optional)
ESC-30(30A) ( Users can buy as spare parts) 1 pes
Great Features:
• Fully proportional
• High quality joystick
• Servo reverse function • Low voltage alarm
• Trainer port available • Remote control
• If it is your first using, please make sure the receiver can be controlled by the
transmitter. If not, please rebind. Details can be found in Bind Process
Description.the transmitter and the receiver must be bind again. More details,
ease refer to the process of frequency bind for 2.4 GHz RIC System.
• Please do not turn on several RC devices and bind them at the same time, only
turn on a set of RC device at one time.
• Do not store the radio system in the damp, dusty and vibratory place, temperature
over 40°C or under -10°C and direct sunlight for long time.
• If there is a long time not for use, please take the battery out from the transmitter
and keep it in the dry place.
• Forbid to wipe the radio system with the organic liquor such as thinner, acetone
and chloroform.
• Do not throwaway the using up batteries, please keep them in the metalloid
container and transfer them to the environmental conservation institution.
• On purpose of environmental conservation and low using cost, we suggest you
use the rechargeable Ni-MH battery.
.art-te c