Table of Contents

Advertisement

Quick Links

I
NTRODUCTION
English
MAESTRO 2060
Introduction
Belgacom thanks you for choosing the Maestro 2060, a telephone for both the home and
the office, which offers many advanced services such as :
- Incoming call numbers display and the storage of these numbers, times and dates of calls.
- SMS sending, receiving and storing
- SIM card content reading and storing into the Phonebook
EU Statement of Compliance
Industrie Dial Face S.p.A., based at 4 Via Canzo 20068 - Peschiera Borromeo (MI) Italy, declares under
its own responsibility that the Maestro 2060 telephone equipment complies with the following stan-dards:
EN 55024, EN 55022 – Electro-magnetic compatibility
EN 60950 – Electrical Safety
and meets the requirements of Directive 1999/5/CE of the European Parliament and Council dated 9
March 1999 in relation to radio equipment and telecommunication terminals and the recognition of
reciprocal compliance.
Compliance with these provisions is demonstrated by the mark
Use of the telephone
The telephone has been designed for connection to Belgacom analogue telephone network.
Important advice
Do not use the telephone in an environment which is excessively humid, dusty, gas saturated or with
risk of water contact. In addition, do not expose it to direct sunlight or other sources of heat. It is advised
not to place the device on slippery or delicate surfaces but to install it at a distance of at least one meter
from other devices that are the source of parasites such as cordless equipment, beepers, televisions and
industrial machinery, etc. Clean it by using a damp cloth or antistatic wipe. Do not use dry cloths or
corrosive cleaners.
Where the device remains unplugged from the network in order to preserve it, it is advisable
to remove the batteries from their housing to avoid any damage by contacts due to the leakage of
the liquid they contain.
Each of these conditions can affect the operating and appearance of the product over time.
For safety reasons, always unplug the network cable before removing the batteries,
when replacing them and also during telephone maintenance.
Keep this user manual safe and observe environmental standards when discarding the equipment.
1
User manual MAESTRO 2060

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2060 and is the answer not in the manual?

Questions and answers

Summary of Contents for Maestro 2060

  • Page 1 MAESTRO 2060 Introduction Belgacom thanks you for choosing the Maestro 2060, a telephone for both the home and the office, which offers many advanced services such as : - Incoming call numbers display and the storage of these numbers, times and dates of calls.
  • Page 2: Table Of Contents

    3.5.11 Free memory ............... . 29 User manual MAESTRO 2060...
  • Page 3 Warranty ................. 59 User manual MAESTRO 2060...
  • Page 4: Installation And Start-Up

    Ringer deactivated, Filtre VIP, Black list, box A/B/C hidden number, ring delayed A/B/C SMS Memory messages Alarm On full for box A/B/C Alarm not stopped New not answered incoming calls PhoneMail Hands-free/Group-listening Batteries off Direct call activated User manual MAESTRO 2060...
  • Page 5: Content Of The Box

    1 spiral cord 1 base 1 AC/DC supplier (with guarantee card) All the functions are available if the telephone is supplied via AC/DC supplier and/or via 3 batteries 1.5Vdc size AA. Batteries are not provided with the telephone. User manual MAESTRO 2060...
  • Page 6: Installing The Telephone

    (B) and close the cover. N.B. Batteries or AC/DC supplier or both may be used. Important: before to take the cover out, the ine cord MUST NOT be connected to the Maestro 2060. After this operation, the Maestro 2060 installation is finished.
  • Page 7: Replacing The Batteries

    SMS Function ....Activated Dialling mode ....DTMF User manual MAESTRO 2060...
  • Page 8: Technical And Functional Features

    - SMS Centers numbers programmability - Eatoni (predictive mode of writing SMS) - 4 languages (FR/NL/D/UK) - Wall mounting - Supply via AC/DC (230Vac main) supplier or by 3 batteries 1,5 V / type AA (not included). User manual MAESTRO 2060...
  • Page 9: Customisation Programming

    Settings Display Ring Clock Fast call Direct call PABX prefix PABX pause Flash CLI on CW Language Lock PIN Reset code Keyboard lock - - - Phone info SMS subaddresses Ring settings Direct call SW release User manuali MAESTRO 2060...
  • Page 10: Setting The Language

    ° If "Lighting"has been choosen, select Normal/ Always off/ Always on via Ωπ keys and press [OK] to pour confirm. Note: the option “Always on” cannot be activated if the Maestro 2060 is supplied via AC/DC supplier. ° If "Contrast", select the desired level (de 1 à 12) via Ωπ keys and press [OK] key to confirm.
  • Page 11: Serring Time And Date

    Press [Menu] key to enter in the main menu . ° Scroll the menu items via Ωπ keys to select "Settings" and press [OK] to confirm. ° Press Ωπ keys to select "Ring" and press [OK] key to confirm. User Manual MAESTRO 2060...
  • Page 12: Setting The Ringer Volum Level

    Scroll the menu items via Ωπ keys to select "Settings" and press [OK] to confirm. ° Press Ωπ keys to select "Ring" and press [OK] key to confirm. ° Press Ωπ keys to select “Ring mode”. Then press [OK] key to confirm. User manual MAESTRO 2060...
  • Page 13: Vip Filter

    When this filter is active,the telephone will not ring for calls incoming from numbers stored in the "Black list". To activate or deactivate the filter,proceed as follows: ° Enter the menu item '"Ring" as described previously ° Select the "Black list" item via Ωπ keys,then press [OK] key to confirm. User Manual MAESTRO 2060...
  • Page 14: Setting The "Fast Call

    Repeat the above procedure to select an empty memory ( 0 to 9) to be programmed ° Press [Assign.] key to access the "Main menu" ° Press [Ph. Book] key and select a Phonebook name/number via Ωπ keys. User manual MAESTRO 2060...
  • Page 15 "Use number". Press [OK] key to confirm. To erase: ° Select the Fast call memory to be erased by pressing Ωπ keys. ° Press the [Options] key ° Select "Erase" by pressing Ωπ keys and press 2 times [OK] key to confirm. User Manual MAESTRO 2060...
  • Page 16: Setting "Direct Call

    Scroll the menu items via Ωπ keys to select "Settings" and press [OK] to confirm. ° Press Ωπ keys to select "PABX prefix" and press [OK] key to confirm. ° If this memory is empty, enter the prefix (1 to 4 digits) and press [OK] key to confirm. User manual MAESTRO 2060...
  • Page 17: Setting Pabx Pause

    Scroll the menu items via Ωπ keys to select "Settings" and press [OK] to confirm. ° Press Ωπ keys to select "CLI on CW" and press [OK] key to confirm. ° Select "Activate?" / "Deactivate?" via Ωπ keys and press [OK] key to confirm. User Manual MAESTRO 2060...
  • Page 18: Setting The Keypad Lock Pin

    Enter a 4 digits Code and press [OK] key to confirm. Reset Code 1234 ..to go back to manufacturing condition 0710 ..to go back without erasing Phonebook, Lists, Messages User manual MAESTRO 2060...
  • Page 19: Use Of The Telephone

    Pick up the handset or press the key.The display will show the time elapsed since the line has been engaged (after 10 secs) and the menu "Ph. Book". ° Release the line at the end of the conversation. User manuali MAESTRO 2060...
  • Page 20: Making A Call

    ∏ ° Press key to access the last called numbers memory. The list of the last called numbers is displayed. ° Scroll the numbers of the list via Ωπ keys to select the name-number to call. User manual MAESTRO 2060...
  • Page 21: The Phonebook

    Press the key. 3.5 The Phonebook The Maestro 2060 has a phonebook of 250 name - number (max : 20 characters and 26 digits). It is possible to store up to 3 numbers per name. Options of the Phonebook menu:...
  • Page 22: Storing In The Phonebook

    Call showing nr. to show the number in the event of incoming call Call anonymous to not show the number in the event of incoming call ° Choose one of the 4 options and confirm via [OK] key. User manual MAESTRO 2060...
  • Page 23: Modify Numbers Of The Phonebook

    Note: this number will be placed at 1st position when making a call. To set the type (icon) of number : ° Select one of the 3 numbers associated to that name and press [Options] key. ° Select "Type" via Ωπ keys and press [OK] to confirm. . User manual MAESTRO 2060...
  • Page 24 ° Select "Fast call" via Ωπ keys and press [OK] to confirm. ° Select a Fast call memory key (a number from 0 to 9) via Ωπ keys and press the [Assign] key to confirm. User manual MAESTRO 2060...
  • Page 25: Modify Names Of The Phonebook

    ° Press [OK] key to confirm. ° Press the Ωπ keys to select the new number of melody (from 0 to 15), with 0 corresponding to the default melody . ° Press [OK] key to confirm. User manual MAESTRO 2060...
  • Page 26: Ring Filter

    Select the name (to be removed) via Ωπ keys. ° Press the [Options] key. ° Select "Erase" via Ωπ keys and press [OK] key to confirm. ° Press [OK] key to confirm. The name and its numbers are removed. User manual MAESTRO 2060...
  • Page 27: Vip List

    The Black list is a list of names-numbers stored in the Black memory. To add or to erase an element of this list proceed as follows: ° Press the [Ph. Book] key. ° Press the [Options] key. ° Select “Show black list” via Ωπ keys. ° Press [OK] key to confirm. User manual MAESTRO 2060...
  • Page 28: Copy Numbers Of A Sim Card

    If the entered PIN code is wrong, a message of error is displayed. If 3 wrong PIN codes are entered, the SIM card is blocked. After a correct PIN code has been entered and confirmed via the [OK] key, the sub-menu “Copy from SIM” is displayed. User manual MAESTRO 2060...
  • Page 29: Free Memory

    The numbers of the callers, stored in the CLI list, may be stored in the Phonebook as follows: ° Press the [Menu] key. ° Press the Ωπ keys to select "Call list". ° Press [OK] key to confirm. ° Press the Ωπ keys to select "Received". User manual MAESTRO 2060...
  • Page 30: Storing A Number Of The Ln Dialled List In The Phonebook

    Phonebook. ° Press the [Options] key. ° Press Ωπ keys to select "Save". ° Press [OK] key to confirm. ∂ ° Enter the name (press [Erase] or keys to erase). ° Press [OK] key to confirm. User manual MAESTRO 2060...
  • Page 31: Dialling Numbers Of The Phonebook / Vip / Fast Call

    Once the telephone is in idle mode, press and hold pressed for a second a key (from 0 to 9) associated to the Fast call number to be dialled. The number will be displayed and then dialled out. User manual MAESTRO 2060...
  • Page 32: Caller Identification

    SE OF THE TELEPHONE English 3.7 Caller identification The Maestro 2060 offer the CLIP and CNIP services ( provided by Belgacom under subscription). ° When a call incomes, the handset icon ( ) is displayed if the call has not answered.The name-number of the caller is automatically stored at 1st place...
  • Page 33: Call A Number Of The "Received" Call List

    To erase all the numbers in the list proceed as follows: ° Press [Menu] key. ° Select "Call list" via Ωπ keys. Press [OK] to confirm. ° Select "Erase all" via Ωπ keys. Press [OK] to confirm. User manual MAESTRO 2060...
  • Page 34: 2Nd Call Handling

    When in conversation, the user can modify the LSP receiving volume level. Hands.free mode (from 1 to 4 levels): ° Press the Ω key to set the LSP volume up (maximum = 04). Press the π key to set the volume down (minimum = 01). User manual MAESTRO 2060...
  • Page 35: Group Listening Mode

    Select "Reminders" via Ωπ keys and press [OK] key to confirm. ° Select "New" via Ωπ keys and press [OK] key to confirm. ° Select a reminder via Ωπ keys and press [OK] key to confirm. User manual MAESTRO 2060...
  • Page 36 For all the cases: ° If the entered data are wrong, a message error will be displayed. ° Press [OK] key to confirm the entered data. Write a note to be displayed at that reminder time . User manual MAESTRO 2060...
  • Page 37 ° Select "Edit text" via Ωπ keys and press [OK] key to confirm. ∂ ° Erase the text via [Erase] or keys, enter the new text via the alphanumeric keys and press [OK] key to confirm. User manual MAESTRO 2060...
  • Page 38: Phone Info

    / deactivated setting will be displayed. ° Press [∆] key to go back. ° Select "SW release" via Ωπ keys and press [OK] key to confirm. The SW version with its date an time of generation will be displayed. User manual MAESTRO 2060...
  • Page 39: Network Services

    ° Select "All calls" via Ωπ keys and press [OK] key to confirm. ° Select "Activation" via Ωπ keys and press [OK] key to confirm. ° Enter the number the incoming calla will be forwarded to. User manual MAESTRO 2060...
  • Page 40: Call Forwarding If Not Reply

    Select "Call forwarding" via Ωπ keys and press [OK] key to confirm. ° Select "If not answered" via Ωπ keys and press [OK] key to confirm. ° Select "Activation" via Ωπ keys and press [OK] key to confirm. User manual MAESTRO 2060...
  • Page 41: Call Foewarding When Busy

    Select "Network services" via Ωπ keys and press [OK] key to confirm. ° Select "Call forwarding" via Ωπ keys and press [OK] key to confirm. ° Select "When busy" via Ωπ keys and press [OK] key to confirm. User manual MAESTRO 2060...
  • Page 42 Select "Deactivation" via Ωπ keys and press [OK] key to confirm. The deactivation code is displayed,the line is engaged in Hands-free mode and the displayed sequence is dialled out. ° Press the ∑ key to go back to idle. User manual MAESTRO 2060...
  • Page 43: Fixed Destination Call

    Select "Deactivation" via Ωπ keys and press [OK] key to confirm. The deactivation code is displayed,the line is engaged in Hands-free mode and the displayed sequence is dialled out. ° Press the ∑ key to go back to idle. User manual MAESTRO 2060...
  • Page 44: Call Waiting (2Nd Call)

    Select "Network services" via Ωπ keys and press [OK] key to confirm. ° Select "Call waiting" via Ωπ keys and press [OK] key to confirm. ° Select "Deactivation" via Ωπ keys and press [OK] key to confirm. User manual MAESTRO 2060...
  • Page 45: Ring Back

    Croix rouge Weerbericht 090027002 1930 1930 Rode kruis 1207 1207 1940 1940 Tele-onthaal 1307 1307 1950 1950 Télé-accueil 1407 1407 1919 1919 Telefonhilfe Horloge 1300 Child Focus Tijdmelding 1200 Antipoison 070245245 Zeitansage 1400 Antigift Centrum 070245245 User manual MAESTRO 2060...
  • Page 46 Check the Phonemail (in both cases : idle or line engaged)as described before. After all the messages have been heard, when in idle the icon and the infor- mations will disappear. User manual MAESTRO 2060...
  • Page 47: Additional Options

    Display a number. ° Press the [Options] keys. ° Select "Save" via Ωπ keys ° Press [OK] key to confirm. ° Enter the name ° Press [OK] key to confirm. The name-number is stored in the Phonebook. User manual MAESTRO 2060...
  • Page 48: Introducing A Pause

    Press the [Options] key. ° Select "Call anonymous " via Ωπ keys. ° Press [OK] to confirm. The line is engaged in Hands-free mode and the code *31* followed by the number is displayed and dialled out. User manuali MAESTRO 2060...
  • Page 49: Options In Conversation Mode

    When the user is in conversation with one of two partners,it can: ≥ ° press the ° or press the [Options] key, select "Alternate" via Ωπ keys,press the [OK] key to confirm and to switch from one to the other parner. User manual MAESTRO 2060...
  • Page 50: Conference Call

    1 or: ° Press the [Options] key, select "Terminate call" via Ωπ keys and press [OK] key to confirm.This operation sends the R1 code onto the line. User manuali MAESTRO 2060...
  • Page 51: Use Of Sms Service

    % of free memory, the name of the messages received/written 6.1 Configuring the SMS service The MAESTRO 2060 can send and receive SMS. The function is active at delivery and it works if connected to a SMS service center. The SMS center numbers are 1717 for outgoing SMS and 01717 for the incoming SMS.
  • Page 52: Assign A Name To A Sms Box

    Select "SMS Box number" via Ωπ keys. Press [OK] key to confirm.. ° Choose a Box number (from 0 to 9) via Ωπ keys or by pressing a 0 to 9 key of the keyboard. Press [OK] key to confirm.. User manual MAESTRO 2060...
  • Page 53: Assign A Pin Code To A Sms Box

    6.1.6 Deactivate a SMS Box Proceed as follows: ° Press the [Menu] key. ° Select “Messages” via Ωπ keys. Press [OK] key to confirm. ° Select a Box via Ωπ keys. Press [OK] key to confirm. User manual MAESTRO 2060...
  • Page 54: Activate A Sms Box

    Enter the text via the alphanumeric keyboard by pressing a few times the keys to choose the characters you need. A counter on the top of the screen diplays the number of entered characters (see table of characters at chapter 6.4.). User manual MAESTRO 2060...
  • Page 55: Reading And Options Of The Sms Sent

    If a PIN code has been programmed, the telephone will ask for it. Enter the PIN, press [OK] key to confirm and to access the SMS messages menu . The list of "Messages" options is displayed.. User manual MAESTRO 2060...
  • Page 56: Sms Receiving

    Phonebook or to call the number 6.3 SMS Receiving In the event of a call incoming from a SMS center, the Maestro 2060 answer automatically to re- ceive the message (if the box of destination has been activated). The icon is displayed when a message has been received.
  • Page 57: Options Menu "Read Received

    SERVICE English ° If a PIN code has been programmed, the Maestro 2060 will ask for it. ° Enter the PIN code, press [OK] key to confirm and to access the SMS menu. The list of "Messages" options is displayed.
  • Page 58 The crossed-bin symbol invites you to use those systems. If you need more information on the collection, reuse and recycling systems, please contact your local or regional waste administration. You can also contact us for more information on the environmental performances of our products. User manual MAESTRO 2060...
  • Page 59: Warranty

    ......................................... . *delete as appropriate User manual MAESTRO 2060...
  • Page 60 Belgacom department open to the public and on in- ternet site www.belgacom.be. Belgacom SA under public law, Bd. du Roi Albert II 27, B-1030 Brussels VAT BE 0202.239.951, Brussels Register of Legal Entities User manual MAESTRO 2060...

Table of Contents