Congratulations on making a smart choice! You have joined an elite group of cooking enthusiasts who demand only the very best from their appliances. A Capital Cooking appliance promises years of enjoyment and maximum performance, allowing cooks everywhere to create culinary memories that last a lifetime.
TABLE OF CONTENTS A SPECIAL MESSAGE TO CUSTOMERS ....................... 1 TABLE OF CONTENTS............................. 2 WARNINGS AND GENERAL SAFETY ........................3 WARMING DRAWER CONTROL FUNCTIONS ....................... 4 WARMING DRAWER LEGEND ..........................4 WARMING DRAWER FEATURES DEFINED......................5 USE OF YOUR WARMING DRAWER ........................6 INITIAL WARMING DRAWER SETUP .........................
Warming Drawer. Capital Cooking Equipment is not responsible for service required to correct a faulty installation. The owner is responsible to make sure this appliance is properly installed.
WARMING DRAWER CONTROL FUNCTIONS SET Button: The SET button is used for three main functions: 1) Activates Warming Drawer 2) Activates Warming Drawer Temperature Set selection mode. 3) Activates Warming Drawer Timer Set selection mode. UP Button: Used to increase Temperature or Timer settings when the mode is active. DOWN Button: Used to decrease Temperature or Timer settings when the mode is active.
WARMING DRAWER FEATURES DEFINED 1. Control SET Button: a. The SET button activates the Warming Drawer and activates the Temperature set mode when pressed once if it is in and Idle (Off) state, when pressed a second time the SET button activates the Timer set mode, when pressed a third time the SET button turns the Warming Drawer OFF.
USE OF YOUR WARMING DRAWER INITIAL WARMING DRAWER SETUP WARNING: Verify that the Warming Drawer is secured to the cabinet via screws in the front face plate to prevent tipping when the drawer is opened. WARMING DRAWER USE WARNING: Always use clean, dry pot holders when food is being placed into or removed from the warming drawer.
SETTING THE WARMING DRAWER 1. Pressing the SET button when is the control is off will actuate the Temperature Set mode. 2. Pressing the SET button a second time when the control is active will actuate the Timer Set mode. 3.
TIPS General • ALWAYS PRE-HEAT THE WARMING DRAWER. This will prevent excess condensation from forming inside the drawer while the drawer heats. • Always center your containers within the drawer from front to back and side to side to ensure even heating.
A brief description of the problem Your satisfaction is our top priority. If the problem persists or is not resolved to your satisfaction by our service consultant, please write to us or fax us a letter at: Capital Cooking Equipment, Inc. Attn: Customer Service Manager 13211 Florence Ave.
Capital Cooking. Call claims, regardless of warranty or non-warranty must be documented with photos and detailed description and/or narrative of the problem.
Page 13
THESE SPECIFICATIONS ARE FOR PLANNING PURPOSES ONLY. CONSULT WITH AN AUTHORIZED TECHNICIAN FOR YOUR SPECIFIC INSTALLATION DETAIL REQUIREMENTS. FOR THE MOST UP TO DATE INFORMATION, CONTACT CAPITAL COOKING EQUIPMENT, INC. INDICATING THE MODEL NUMBER. WE RESERVE THE RIGHT TO CHANGE THESE SPECIFICATIONS OR DESIGN WITHOUT NOTICE.
Need help?
Do you have a question about the Maestro Series and is the answer not in the manual?
Questions and answers