Video Playback On Pc (.Dv5); Convert The File Format To Avi; Digital Zoom - NST FULL D1 DVR User Manual

Note: It's recommended to save the file to the default format for security reasons. Only specific video
player supports the default format and not everyone can see the video footage.

When "AVI" is selected, the copied video will be converted to "avi", and you can open it with any media player
which supports the "avi" format on PC.
Step4: In "TRAGET DEVICE", select "USB DEVICE" or "DVD DEVICE" based on the device you want to use for
video backup.
Note: "DVD DEVICE" is available for selected models only.
Step5: In "REQUIRE SIZE", select "SUBMIT" to know the file size of the selected data.
Step6: In "BACKUP", select "SUBMIT" to start backup to your USB flash drive, and wait till the backup successful
message appears.

4.6 Video Playback on PC (.dv5)

For video backup with the format ".dv5", you can only use our own player to play.
Note: It's NOT allowed to remove the hard disk installed in the DVR and connect it directly to your PC to
check recorded video clips. It might impair the files saved in the hark disk, causing the loss of
those files even when the disk is replaced back to the DVR.
To play ".dv5" video on your PC:
Step1: Insert the USB flash drive or CD / DVD with recorded data into your PC.
Note: The supported PC operating systems are Windows 7, Vista & XP.
Step2: Find the program "PLAYER.EXE" in the USB flash drive, and double-click it to install.
Note: "PLAYER.EXE" can also be downloaded from www.surveillance-download.com/user/c700.swf.
Step3: Run the program, VideoPlayer, and browse to where you save the recorded data.
Step4: Select the file you want to start video playback

4.6.1 Convert the file format to AVI

To convert the video file format to AVI, click "AVI" from the playback panel to start file conversion.
Note: The recorded audio (if any) will be removed when the file format is converted to AVI.
Note: If the backup video includes data for multiple channels, click to a specific channel for this function
to work properly.

4.7 Digital Zoom

Switch to the channel you want to zoom in, and move to the left side of the screen to show the quick start bar.
Click to enter the zoom-in mode. In this mode, click and drag the red frame on the bottom left of the screen to
move to the place you want to see.
17
FREQUENTLY-USED FUNCTIONS