Store the speaker in a cool dry place. The BTX270 contains a lithium ion battery. Lithium ion batteries are flammable and can cause fire if misused or defective. Always dispose of the packaging and unit in accordance with the local regulations and in a responsible manner.
Speaker Overview 1. Volume Up 2. Volume Down 3. Multi-Function 4. 3.5 Audio in 5. Micro-USB Charging Port 6. Power On / Off Kinivo BTX270 Rechargeable Wireless Speaker...
Seamlessly stream music from any Bluetooth (A2DP) capable device Supporting Bluetooth protocol v2.1+EDR and A2DP 1.2 audio streaming profile Connect an iPod or other non-Bluetooth devices via 3.5mm port Uses high quality apt-X audio codec with compatible devices Kinivo BTX270 Rechargeable Wireless Speaker...
The speaker needs to be paired to a Bluetooth device before using. Power on the speaker then press and hold the multifunction button on the speaker for 6 to 8 seconds. The speaker will play an audible tone and the blue and red LEDs will start flashing Kinivo BTX270 Rechargeable Wireless Speaker...
Page 8
Activate the Bluetooth function on your device that you wish to connect to and search for and pair to the BTX270. The speaker will automatically connect with your device once the pairing is complete. For iPad, iPhone, iPod Touch Navigate to Settings >...
USB power sources include computers, laptops, USB hubs, USB AC adapters and USB car chargers. When the BTX270 is charging, the red light will be lit. When the battery is fully charged, the red light will turn off. The charging process can take 2 to 3 hours to charge the battery completely.
6. LED Indication Status LED Indicator Powered off Bluetooth pairing mode Blinking blue and red Powered on Blinking blue Low battery (not plugged in) Blinking red Battery charging Steady red Kinivo BTX270 Rechargeable Wireless Speaker...
6 to 8 seconds. Push and hold the multifunction button for 3 seconds Voice command To use the voice features your mobile device must support the voice Voice dialing (Siri for supported iPhones) dialing function. Kinivo BTX270 Rechargeable Wireless Speaker...
Page 12
Refuse incoming call Push and hold the multifunction button for 3 seconds Switch call between phone and BTX270 Push and hold the multifunction button for 3 seconds Answer call, Press and release multifunction button End call Redial last number Press and release multifunction...
2. Speaker no longer connects to my device To ensure the BTX270 speaker is in working order, delete all existing pairings on all devices and try the pairing process again. 3. Speaker works with my smartphone but not my computer The Bluetooth adapter in your computer needs to support the Stereo Bluetooth profile (A2DP).
You may need to verify that your computer’s Bluetooth adapter supports A2DP (Advanced Audio Distribution Profile). Please contact Kinivo Support if you are still experienc- ing any issues.
6. Error messages when connecting on Mac OS X Verify that the BTX270 speaker are powered on. If you are still unable to connect, restart the computer and remove the BTX270 from the Bluetooth device list. Try to pair the speaker again.
Page 16
2. How many Bluetooth connections will the BTX270 speaker remember? The BTX270 will remember up to 8 previous Bluetooth connections. When the BTX270 is powered on, it will automatically con- nect to the last device it was connected to. If the last device isn’t found, it will connect to the second last device, and so on.
Now go to your computer’s “Show Bluetooth devices” and click on Connect. 4. How can I tell when the battery is low? When the BTX270 has a low battery and it is powered on, the red light will blink intermittently and the speaker will play an audible tone.
Page 18
In the unlikely event that the product proves to be defective, Kinivo will repair or replace the product free of charge. If replacement is required and if Kinivo then no longer carries the same product, then Kinivo reserves the right to substitute the product with a replacement product of like quality and size, suitable for the intended use.
Page 19
If your product is not functioning or you have any concerns please contact Kinivo Support before returning the product. Online Support / Contact Us Please visit us at support.kinivo.com or www.kinivo.com for support information, downloads and how-to’s.
Page 20
Made in china Kinivo Product Support Online : http://support.kinivo.com Email : support@kinivo.com...
Need help?
Do you have a question about the BTX270 and is the answer not in the manual?
Questions and answers