Advertisement
Advertisement
Summary of Contents for Leviton OmniTouch 7
- Page 1 OmniTouch 7 Touchscreen 7" Color Touchscreen Installation Guide...
-
Page 2: Table Of Contents
TABLE OF CONTENTS SPECIFICATIONS..................2 DESCRIPTION..................3 PLANNING....................3 Wiring Requirements..............3 INSTALLATION..................4 REMOVING THE TOUCHSCREEN............7 CONFIGURING THE TOUCHSCREEN.............8 Controller Settings................8 Page 1... -
Page 3: Specifications
SPECIFICATIONS Size: Mounting Bracket Cutout: 6.125" W x 4.625" H Overall Dimensions: 7.375" W x 5.25" H x 0.55" D LCD View Area: 7" diagonal Display: Resolution: 800x480 Voltage: Operating Voltage (PoE): 42 - 57 VDC Nominal Voltage (PoE): 48 VDC Nominal Voltage (Aux): 12 VDC Power:... -
Page 4: Description
The OmniTouch 7 is an IEEE 802.3af compliant Power over Ethernet (PoE) Powered Device (PD). The OmniTouch 7 receives its power over the same cable that connects the OmniTouch 7 to the network, using a Power Sourcing Equipment (PSE) device, such as a PoE network switch, hub, or power injector. -
Page 5: Installation
INSTALLATION 1) Make the cutout for the touchscreen Tape the template (Installation Template for OmniTouch 7 Touchscreen) onto the wall, ensuring that it is level and plumb. Use a sharp utility knife to cut along the 4 straight dotted lines on the template. - Page 6 2) Install the mounting bracket into the cutout Insert the mounting bracket into the wall cutout with the flanges (marked "A" in Figure 2) at the bottom and retention clips (marked "B" in Figure 2) rotated to the interior of the bracket as shown. Figure 2 Rotate each of the retention clips clockwise (as shown in Figure 3) so that the clip grasps the back of the wallboard and the clip...
- Page 7 3) Installing the touchscreen Insert the 8-position modular cable (marked "A" in Figure 4) into the RJ-45 connector (LAN/POE) on the touchscreen (marked "A" in Figure 5). Align the tabs on the mounting bracket (marked "B" in Figure 4) with the slots on the touchscreen (marked "B" in Figure 5). Attach the touchscreen to the mounting bracket by inserting the tabs on the bracket into the mating slots on the touchscreen and then gently pushing downward to lock into place.
-
Page 8: Removing The Touchscreen
Secure the touchscreen to the mounting bracket flanges using the provided screws. Figure 6 REMOVING THE TOUCHSCREEN After installation, if it is necessary to remove the touchscreen from the wall: a) Remove the screws that secure the touchscreen to the mounting bracket. -
Page 9: Configuring The Touchscreen
CONFIGURING THE TOUCHSCREEN When power is first connected to the OmniTouch 7 touchscreen, if the touchscreen hasn’t previously been configured to communicate with the Leviton controller, the touchscreen Controller Settings screen is displayed. The IP address of the OmniTouch7 is displayed next to "Touchscreen IP". - Page 10 0 to 65535. Touch the first edit box to the right of "Encryption Keys:" and enter Encryption Key 1 for the Leviton controller by pressing the respective keys on the keyboard. The Encryption Keys are used to encrypt and decrypt the data between the Leviton controller and the OmniTouch 7.
- Page 11 Touch the second edit box to the right of "Encryption Keys:" and enter Encryption Key 2 for the Leviton controller by pressing the respective keys on the keyboard. After all controller connection settings have been entered and confirmed, press the "Save" button at the bottom right of the screen to save the settings and connect to the Leviton controller.
- Page 12 Leviton Manufacturing Co., Inc. LEVITON LIMITED WARRANTY Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that products manufactured by Leviton under the Leviton brand name (“Product”) will be free from defects in material and workmanship for the time periods indicated below, whichever is shorter: •...
Need help?
Do you have a question about the OmniTouch 7 and is the answer not in the manual?
Questions and answers