Information And Support - SAGEMCOM RTI95 T2 HD UK User Manual

LU 253463441-A RTI95 T2 HD UK.book Page 41 Mercredi, 1. février 2012 10:59 10
Resetting the recorder and formatting the hard disk drive
Important
• If you reset the default settings, you lose the channels and
settings you made.
• If you format the hard disk drive, you lose all the recordings
saved in your recording library.
• Take care that the format of the hard disk drive can take several
minutes at next initialization and is depending of the size of the
hard disk drive.
1. Go to > Settings > Technical Settings >
Re-initializing.
2. Enter your parental code and press the
3. Select Yes or Include HDD Format. If you choose
to Include HDD Format, the receiver will return to
default settings and also ALL of your recordings
will be deleted.
To cancel the operation, select No, or press the
or key.
4. Press the key to confirm the reset.
5. Once the default settings are restored, the
recorder installation screen is displayed.
You can then reconfigure your recorder (see Running your first installation, page 20).

Information and Support

The information contained in this menu may be requested if you contact your supplier or our technical
support service.
You will find here important information about the recorder, the hard disk drive, the embedded software
and the customer support details.
To access the recorder technical information, go to
Antenna Signal Information
Go to Signal Information.
This menu lets you find out the signal level and quality of your antenna, based on the channel being
watched.
Network Information
Go to Network Information.
This menu displays the network information of your decoder (IP address, etc...) when it is connected to
your home network via Ethernet.
RTI95 T2 HD UK
key.
> Settings > Information and Support.
41