Walka End User licence agreement. Introduction Welcome to the exciting world of DStv Mobile. With your Walka handheld TV you will be able to connect to DVB-H broadcast mobile TV and have access to live DStv Mobile content. This guide will help you activate your Walka so you can start watching right away.
Step 1: Familiarise yourself with the hardware Front 1. Viewing screen 2. Speaker Back 3. Retractable antenna for receiving the DVB-H signal Important: Extend and position vertically to improve signal reception. 4. Device serial Number. 5. A CAS number is used in conjunction with the serial number when activating the device.
USB Port on your computer. Plug the USB cable into the USB port Step 3 : Activate your Walka You can activate your Walka using one of the two options listed below. Option 1: Go to dstvmobile.mobi on your mobile phone, or http://www.dstvmobile.com for a list of activation options.
Step 4 : Basic Operation 1. To power the device, press and hold Power button (7) until the LCD is turned on and you see the DStv Mobile hello screen. 2. The splash screen will be displayed, and the device will then connect to the DVB-H network and begin playing.
Resetting the Walka (Soft reset) If you experience an error with your Walka, you can reset it. To do this, you will need to locate the reset point on the left side of the device. Insert a paper clip into the hole. Once the device screen goes to black, remove the paperclip and the device will restart.
2. Click on the Get DStv Mobile Tab, then click on Phones and Devices. 3. Locate the Walka on the list of devices and then click on Read more. 4. Scroll to the bottom of the page and click on Download rmware.
320 by 240 pixels. It uses a terrestrial broadcast similar to radio, unlike the satellite technology used for your DStv Service at home. This means that you can enjoy Mobile TV on the move, when in a DVB-H Broadcast coverage area.
Need help?
Do you have a question about the Walka and is the answer not in the manual?
Questions and answers
How to make a channels work on the settings