Table of Contents
Advertisement
8. Reset the fastener by pushing on
the pointed end until it pops back
almost flush with the fingers on
the housing.
9. Put the fastener in the hole of the
side of the trunk lining and push
on the center until it locks (the
center is flush with the head).
Replacing Rear Bulbs (in Trunk
Lid)
1. Open the trunk.
2. Use a Phillips-head screwdriver to
remove the two screws from the
bulb holder. Remove the holder
from the taillight assembly.
SCREW
3. Determine which of the two bulbs
is burned out: stop/taillight/side
marker or back-up light.
4. Remove the socket by turning it
one-quarter turn counterclockwise.
Lights
CONTINUED
Maintenance
Hide quick links:
Advertisement
Table of Contents
