Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide This manual will Guide you in the Installation of your LP-570G. Before you proceed with the installation, please read the following Notes: Note 1: The following installation was operated under Windows XP. (Procedures are similar to Windows 98SE/Me/2000.)
Page 3
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide Click Next process installation. Figure 3 Click Install to WLAN USB adaptor installation. Figure 4 www.lanpro.com...
Page 4
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide On the Windows Logo Software Installation screen, click Continue Anyway to continue. Note: Not all the drivers will have this message box. Figure 5 Click Finish to complete the installation.
Page 5
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide Uninstallation Uninstall the WLAN USB Adaptor Driver from Wireless Network Driver and Utility or Control Panel. Click Uninstall Change/Remove) remove Wireless LAN USB Adaptor driver. Figure 7 Click Yes if you want to remove Wireless LAN USB Adaptor Driver.
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide Making a Basic Network Connection In the following instruction for making a network connection, we use the utility we provided to configure your wireless network settings. Note: For Windows XP users that want to configure your wireless network using this Utility, please perform...
Page 7
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide Click Available Network button to scan available wireless network adapters. Double click on the network adapter that you are going to connect to. Figure 12 Click the OK button to confirm that you are connecting to an open wireless network.
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide Click OK to add this network into the profile list. Note: This example is an open wireless network. If you are going to connect to a Wireless adapter with...
Page 9
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide Click Available Network button to scan available access points. Double click on the AP that you are going to connect to. Figure 16 Double click to create profile that you are connecting to an open wireless network.
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide Click OK to add this network into the profile list. Note: This example is an open wireless network. If you are going to connect to an AP with security protection, you...
Page 11
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide You may click on the tabs above to configure this adapter. The checkboxes below provide the following functions: • Show Tray Icon • Radio Off • Disable Adapter Check this checkbox to show the utility icon on yoursystem...
Page 12
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide Profile Profile lists preferred connections. You can click the buttons beside to do configure each connection. Figure 21 Add: Click this button to add a connection profile for this adapter.
Page 13
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide Advanced This Advanced tab provides advanced configurations to this adapter. Every modification in this tab will be performed after clicking the Apply button. To restore the default settings of the advanced tab, click the Set defaults button to perform restoring.
Page 14
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide Status This tab shows the current connection status of this adapter. Figure 24 Statistics See this tab to show the transmission activity record. Clicking the Reset button recounts the values from zero.
Page 15
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide Wi-Fi Protected Setup This device provides Wi-Fi Protected Setup, an easy and secure Wi-Fi net- work setup solution, which contains two options of operation methods, each one will be functional.
Page 16
Wireless - Equipment - 2.4 GHz - LP-570G - Installation guide Advanced Beacon Interval: Define interval between beacons from 20~1000. DTIM Period: Set the DTIM period between 1~255. Preamble Mode: Click the drop list to select the preamble to be long, short or auto.