Summary of Contents for Videon EL12004RT
- Page 2 I. Connecting the Device. Before powering up the system make sure to connect the video inputs/outputs, network cable and usb mouse. Refer below for basic connection. Regular E series Embedded DVR EL series E series EL series Power Connector and Switch Power Connector BNC camera inputs 4/8/16 channel BNC camera inputs 4 channel...
-
Page 3: Network Status
II. How to connect the DVR to the Network and Internet. 1. Network Address. User must assign an Ip address, subnet mask and gateway. To know what network settings to use, do a ipconfig command prompt or get the network status of your existing computer. ipconfig result network status The Subnet Mask and Default Gateway will remain the same on the DVR but the IP address would be different mainly... - Page 4 2. Port forwarding. To access the DVR over the internet user must forward the HTTP port and TCP port. Each router has a unique way of port forwarding some routers call it pin holes or virtual server but all of them will always have a common requirement.
- Page 5 Server IP - 66.163.26.245 Port - 7070 Site Name - the site name that was registered in www.viewdvr.com Username - leave blank if using Videon DDNS Password - leave blank if using Videon DDNS note: Always register a new Site Name when installing a new system.
- Page 6 4.2 Multi-site Manager Click Install the Multi-site Manager and add the Sites. On the Add Menu user can add the device they need to connect too. Device name: Any Name Port: Service/TCP Port User Name: Use to login on DVR Password: Use to login on DVR Total Channel: number of cameras IP Address: Public IP address of the DVR or...
- Page 7 III. Setting the DVR Schedule 1. Manual Record. To open the Manual Record menu and enable Scheduled Recording, on the Main Menu select Advance Setup and then click on Manual Record or on the front panel of the DVR press the REC button. On the Manual Record window High light “All”...
- Page 8 To set Motion only for the weekends or for Saturday and Sunday. Select Sat on the Weekday field and All for channel field. Then for Period 1 highlight only MD. Then Copy and Paste to the Sunday field...
- Page 9 IV. DVR Search & Backup Procedures Before beginning any backup procedures, make sure to have the CD’s, DVD’s and USB drives that is supported by the DVR. The DVR's drive tray will show what type of media it supports, if it shows only CD it mean will only support CD's but if it shows DVD and CD it can support both media.