Additional Preparation; Connecting External Equipment - JVC LT-26C50BU Instructions Manual

Additional preparation

Connecting external equipment

Connect the equipment to the TV, making
the correct rear panel and front panel
connections.
Before connecting anything:
• Read the manuals that came with the
equipment.
Depending on the equipment, the
connection method may be different from
the diagram. Also, the equipment settings
may need to change depending on the
connection method.
• Turn off all the equipment including the
TV.
• The "Specifications" on page 55 give the
details of the EXT terminals. If you are
connecting equipment not listed in the
following connection diagram, see the
table to choose the best EXT terminal.
• Connecting cables are not supplied.
• When a device that can output component
signals is connected to the EXT-4
component terminal, the TV input can be
automatically changed to EXT-4 by just
turning the power supply of the connected
device on. For details, see
"COMPONENT AUTO SELECT" in the
SET UP menu on page 42.
Connecting the PC
For details, see "Connecting to the computer"
on page 45.
46
1 VCR (composite signal)
2 VCR (composite signal/S-VIDEO signal)
3 T-V LINK compatible VCR (composite
signal/S-VIDEO signal)
4 Decoder
5 DVD player (composite signal/S-VIDEO
signal)
6 DVD player (composite signal/RGB
signal)
7 DVD player (component video signals;
Y/Pb/Pr)
8 TV game (composite signal/RGB signal)
9 TV game (composite signal/S-VIDEO
signal)
0 Headphones
- Camcorder (composite signal/S-VIDEO
signal)
= SCART cable
~ Audio cable
! Video cable
@ S-VIDEO cable
# Component cable