Set Up Your Net-Box Server In 5 Easy Steps; Connect Your Devices; Set Up Your Admin Account - Axentra net-box Getting Started Manual

Axentra™ Net-Box Getting Started Guide

Set up your Net-Box Server in 5 easy steps:

1. Connect your devices

Please refer to your 'Getting Started Card' to connect all of your devices to the Net-Box and power up
your Net-Box Server first. After your Net-Box emits tones of the scale (do re mi fa so la ti do), then power
up all connected devices (PCs, modems, printers, etc.).

2. Set up your Admin account

Use any connected host computer to administer your Net-Box. From your default Web browser, enter the
URL "https:/AxentraServer". If your Net-Box has not yet been configured, this will bring up your Net-Box's.
getting started wizard. If you encounter a problem, try entering the Net-Box's default IP ,
https://192.168.0.1.
The first time you access this secure URL, your browser will ask you if you want to accept the certificate
attached to your Net -Box. You will want to accept this certificate to continue.
At the first power up session, the Setup Wizard should appear.
The first screen of the Net -Box setup asks for your Serial Number (located on a label on the bottom or
side of your Net-Box).
Once entered, follow the on-screen instructions to set up and create the first User account ('Admin').
Administrator users have access to the 'Administration Center' where they can configure system-wide
settings, and administer both the Server and user accounts.
Your user account is the key to accessing account-based services on your Net-Box, like email. The
Admin user will set up a new user account for each user connected to your network.
Page 7