Advertisement
Digital inputs
DAC-10 digital audio connectivity:
• AES/EBU balanced digital audio input
• BNC SPDIF digital audio input
• COAXIAL SPDIF digital audio input
• TOSlink optical SPDIF digital audio input
• USB 2.0 audio PCM input (up to 24bit/192kHz)
DAC-10 DSD digital audio connectivity:
• BNC SPDIF digital audio input
• COAXIAL SPDIF digital audio input
• TOSlink optical SPDIF digital audio input
• USB 2.0 audio PCM input (up to 24bit/192kHz)
• USB 2.0 audio DSD input for DSD64 stream
AES/EBU: Use a screened, twisted pair cable from the digital output of your CD transport or CD
player to the AES/EBU digital input of the DAC-10 (AES/EBU socket is a receptacle type)
Coaxial: Use a RCA plug terminated, coaxial interconnect of your choice for the COAXIAL digital
input. The cable for the COAXIAL input should be no longer than 1.5m (5 feet) for the best
result
USB: Use USB 2.0 cable fitted with USB type B plug terminated for the DAC side. For best
results use a good quality USB 2.0 cable without any sleeve inductors.
NB - DAC-10 USB interfaces are powered from our on-board, purpose designed, extremely low
noise linear power supply (not from your USB socket – which is used for data transfer only).
TOSlink: Use preferably multi-strand glass fibre type optical audio cable.
NB - 24bit/192kHz sample rate playback through TOSlink cannot be guaranteed.
BNC: Use same type of preferred coaxial cable as used for the RCA Coaxial input, terminated
with the BNC plug.
7
Advertisement
