Advertisement
PAGE TABS
At the bottom of each synth are three tabs which select different operating
areas. Click on the tabs as required.
MASTER PAGE
Here, you can set parameters releated to velocity, keyboard range and tuning.
VELOCITY
VELOCITY CURVE
VEL > VOL
INPUT
RANGE
TRANSPOSE
TUNING
COARSE
FINE
PITCHBEND
DOWN
UP
30/7/10
Select from a variety of different velocity curves here. By
default, velocity is set to FIXED to emulate the real thing.
Set velocity sensitivity to taste with this control.
Set the keyboard range for the selected instrument. Click
LEARN and play a low and then a high note on your MIDI
controller to set the range.
You can transpose the instrument with this control.
Tune the instrument in semitone steps.
Fine tune the instrument in cents.
Set the interval (in semitones) for downwards pitch bend.
Set the interval (in semitones) for upwards pitch bend.
Page 4
Advertisement
