Advertisement
Game Console
High Resolution VGA
PC
Audio L&R
Home Theater Display (RGBHV)
Make sure you use only the accessory component video cable for 480p mode.
No other XBOX accessory cables will work in this mode.
Next, disconnect the green cable from your regular TV and connect the red, green,
and blue wires to the component YPbPr video inputs on the X-Blaster, matching
color to color. Connect a 15-pin VGA/VGA computer monitor cable from the jack
marked "VGA Input" to your computer's video display card output.
Finally, connect the 15-pin plug from your computer monitor to the jack marked
"VGA Output" on the X-Blaster. Plug the supplied power adapter into the X-Blaster.
Turn on your PC and monitor. You should see normal computer video screens from
your PC. Use an RCA plug to mini (1/8") plug adapter cable to connect audio from
X-Blaster to your PC's sound card line level input.
Now you are ready to play the XBOX game on your VGA monitor. Load a game disk
into the tray. When the game starts, XBOX will switch to 480p automatically and
you will see the game on your PC monitor. A small red LED indicator will light when
a video game signal is detected. When you are finished playing, simply turn off
your video game system and your monitor will be switched back to your PC.
Note: You may notice that the converted image has shifted horizontally on your PC. This is normal, and can easily
be corrected by using the image position controls on your PC monitor, or by running PowerStrip, a freeware pro-
gram available for download at http://www.entechtaiwan.com/ps.htm.
Example: To correct image position with PowerStrip, run PowerStrip.exe and select the "Display Profiles" tab. Then
select "Advanced Timing Options" , followed by "Position and Size Control" . After you have centered the image,
select "OK" to save your settings.
Advertisement
