Advertisement
Instructional Usage
Charging the Fusion
Before first use, charge the Fusion using the charging cable provided for 12
hours. When charging, the LED indicator is red, and when fully charged, it will
turn to green. After the initial charge, the charging time takes maximum of 2
hours.
Pairing with iPad mini
• Press the Bluetooth™ button on the Fusion to send signal. The Bluetooth™
LED will flash in blue and will be under detecting stage for a maximum of 3
minutes.
• Turn your iPad mini Bluetooth™ connection mode on.
• When the Bluetooth™ keyboard is discovered, select the "Fusion" from the
iPad mini screen, a passkey will appear on the screen of the iPad.
• Type in the passkey provided and press the ENTER key on the keyboard. Your
Fusion mini keyboard will then be successfully paired with your iPad mini.
Note: Pairing is only needed for the initial setup. After your first successful
connection, the keyboard will connect automatically to your iPad when powered on.
Precautions
Please read this User Guide carefully before using the product.
The contents herein may be changed to deliver the better services to the
end-user. To keep the perfect performances of the product, never use it in cold,
hot, dusty or moistened areas or places, especially in the following conditions:
1. Moist or underwater conditions.
2. Conditions near the heater or high-temperature service.
3. Conditions with direct sunshine.
4. Conditions with apt falling.
5. Never dismantle this product without due permission, otherwise it may nullify
the warranty clauses.
Advertisement
