Tire Pressure Monitoring System (Tpms); Auto Door Locks - Honda Fit LX 2015 Technology Reference Manual

TIRE PRESSURE MONITORING SYSTEM (TPMS)

Monitors the vehicle's tire pressures.
How It Works
What to Do
1. Visually inspect the tires for damage.
2. Use a tire air pressure gauge to
check which tire(s) have low
pressure.
What to Do
Any time you inflate, change, or rotate one or more of your tires, you need to
recalibrate the system.
6
When the tire pressure drops
significantly below recommended
levels, the low tire pressure
indicator comes on.
3. Inflate the tire(s), if necessary, to the
recommended pressures listed on
the label on the driver's doorjamb.
4. Start TPMS calibration.
1. Make sure the shift lever is in
Park (P) or the parking brake is
applied and the vehicle is on.
2. Press and hold the TPMS
button until the low tire
pressure indicator blinks twice.
Calibration begins and will
finish automatically.

AUTO DOOR LOCKS

Program how and when the vehicle doors automatically lock and unlock.
Door Locks
D e f a u l t L o c k S e t t i n g
All doors are preset to lock when your vehicle
reaches about 10 mph.
D e f a u l t U n l o c k S e t t i n g
All doors are set to unlock when the driver's door
is opened.
Changing Settings
Program all doors to unlock when you shift to Park. See your Owner's Manual for
other programmable settings.
Note: The driver's and front passenger's door can be opened by pulling the inner front door
handle, regardless of the setting.
1. Close the driver's door. Shift
into Park (P) or apply the
parking brake.
2. Turn the ignition switch to
ON (II).
3. Press and hold the unlock
side of the master door lock
switch for about 10 seconds.
In that time, you will hear
three clicks.
4. Within 20 seconds, turn the
ignition switch to LOCK (0).
7