Find Your Phone Using Your Sensor; Take A Photo Remotely; Change The Battery - Nokia Treasure Tag User Manual

Find your phone using your sensor

Can't remember where you put your phone? Use your sensor to locate it.
1. Press the multifunction key. Your phone plays a notification sound to help you locate it, even if
your phone is in silent mode.
2. When you find your phone, tap the notification on your phone to switch off the notification sound.

Take a photo remotely

Want to avoid camera shake when taking a photo with your phone? Use your sensor to take the photo
remotely, so you don't have to use the camera key or icon on your phone.
If your phone does not have the Lumia Selfie app, you can download it from Store.
1. On your phone, tap Lumia Selfie.
2. To take a photo, on your sensor, press the multifunction key.
After taking a photo, you can edit the shot on your phone. To go back to take another photo, press
the multifunction key.

Change the battery

Your sensor comes with a battery already inserted, but eventually you need to change it.
Your sensor uses a standard CR2032 battery. When the battery is completely empty, you need to
replace it with a new one before you can use the sensor again.
When the battery runs low, your sensor plays an alert tone, and a notification shows up on your
phone's Treasure Tag app. If you've pinned your sensor to the start screen of your phone, a battery
icon shows up on the tile.
1. Put a paperclip or similar tool into the gap in the lower left corner on the back of the sensor.
9
© 2014 Microsoft Mobile. All rights reserved.