If the lens stops while inspecting the lens-servo stop accuracy, select "3.SET DELAY-TIME" and input a
figure from 0 to 1000 for the delay time (msec: millisecond) to prevent stopping the lens into the entry field
of "DELAY-TIME" of the below.
Note:
The value of "ADUST DELAY-TIME" is set by the adjustment software. So, if the lens does not
stop during the inspection of "LENS DRIVING STOP ACCURACY", any value can be input without
problem.
However, the larger the value of "ADJUST DELAY-TIME" gets, the longer the inspection time becomes.
Added page
- L38-1・ AF-S DX18-70/3.5-4.5G -
INC
JAA79051-R.3624.A
January. 26. 2007