JVC GGT0312-001A-H Instructions Manual page 14

Using the search code function
This function searches through the codes one by one, beginning from
the fi rst code in the list.
1.
Turn on the device manually.
2.
Switch the remote control mode that matches your device.
Press to select the mode.
3.
Activate the search code function.
Hold down and
4.
Point the remote control at your device and press
If there is no response, try the next code by pressing } and
press again. Repeat the process until your device turns
off.
5.
Press to register the code.
The code is now set. Confi rm that the mode indicator goes out.
■ If your TV's remote control still does not work even after using the
search code function, use your device's own remote control. The
TV's remote control is not guaranteed to work with all models,
brands or operations.
14
until the mode indicator blinks.
.
Button functions
■ Change the remote control mode
■ Turn on/off the device
■ Navigate the menus
Select
Display top
menu
■ Playback / Record, etc.
Select a chapter
Rewind
Record
■ Mute ➡ Press "
■ Volume ➡ Press "
■ Select a surround mode ➡ Press "
• Depending on your device, some functions may
not be operable with this remote control.
Display menu
OK
Back to previous
menu
Forward
Stop Play Pause
"
"
"