Page 2
Installation Guide: Canon 350D, 400D, 450D, 500D, 1000D (Rebel XT, XTi, XSi, T1i, XS) Thank you very much for your purchase of a Katz Eye™ focusing screen. This document provides installation instructions for the Canon 350D, 400D, 450D, 500D &...
Page 4
7. Tip the camera so that the focusing screen falls toward the main mirror. Grasp the screen by one of the nearest tabs and lift out the focusing screen. Be very careful to touch only the tab, so the screen face does not become damaged! Store the screen in a safe place, such as wrapped in a lens cloth and placed in the Katz Eye™...
Page 5
9. Remove the bagged Katz Eye™ screen from the plastic case. Orient the screen so that the protruding prism is facing you. Grasp the Katz Eye™ focusing screen by its handling tab and withdraw from the protective bag. Be very careful to touch only the tab, so the screen...
Page 6
11. Insert the retainer clip into the camera. Be sure the two tabs at the rear of the clip engage the matching notches in the frame. Click Photo to Enlarge Click Photo to Enlarge 12. Press the retainer clip gently toward the top of the camera until it engages. It is important not to catch the mirror damping foam strip in the retainer as it is closed.
We would also be happy to advise your choice of local camera shop regarding the installation procedure. Thank you very much for your purchase of a Katz Eye™ focusing screen and may the world favor you with abundant photo opportunities. Take care, Rachael Katz –...
Need help?
Do you have a question about the Focusing Screen and is the answer not in the manual?
Questions and answers