capello Rise & Shine User Manual page 14

setting the alarm(s)
Press and hold ALARM 1 or ALARM 2 button to enter ALARM SETTING MODE. (The 'HOUR' digits will begin
to blink on display)
Repeatedly press the TUNING DOWN / SKIP / SEARCH or TUNING UP / SKIP / SEARCH buttons to set the hour.
Press the ALARM 1 or ALARM 2 button to con rm. (The 'MINUTE' digits will begin to blink on display).
Repeat steps 2 – 3 to set the minute. (The 'ALARM VOLUME' digits begin to blink).
Press VOL + or VOL – buttons to set the alarm volume level.
Press the ALARM 1 or ALARM 2 button to con rm. (The 'ALARM SOURCE' icon will begin to blink on display).
Repeat steps 2 – 3 to select an alarm source; buzzer, iPod/iPhone on dock, iPod/iPhone on USB audio,
or FM radio. The corresponding alarm source icon lights up
notes: When the alarm rings, it sounds for 60 minutes then shut off automatically.
If alarm is set to iPod/iPhone (dock or USB), the unit begins playback from the current track that you were listening to on your
iPod/iPhone. Ensure that you have your iPod/iPhone set to "REPEAT", otherwise the unit will stop playback after nishing
the current song if the remaining total play time is less than 60 minutes.
If iPod/iPhone is selected as alarm source but no iPod/iPhone is connected, the unit automatically switches to buzzer source.