Receive An Audio Message; Instant Messaging - Nokia 6086 User Manual

M e s s a g i n g
To retrieve a phone number from Contacts, select
To send the message to multiple recipients, add the contacts you want one at
a time.
To send the message to persons in a group, select
group you want.
To retrieve the contacts to which you recently sent messages, select
Recently used.
5. To send the message, select Send.

Receive an audio message

When your phone receives audio messages, either
N messages received is displayed, where N is the number of new messages. To
open the message, select Play; or if more than one message is received, select
Show > Play. To listen to the message later, select Exit. Select
available options.

■ Instant messaging

You can take text messaging to the next level by experiencing instant messaging
(IM) (network service) in a wireless environment. You can engage in instant
messaging with friends and family, regardless of the mobile system or platform
(such as the internet) they are using, as long as you all use the same IM service.
Before you can start using instant messaging, you must first subscribe to your
wireless service provider's text messaging service and register with the IM service
you want to use. You must also obtain a user name and password before you can
use instant messaging. See "Register with an instant messaging service," p. 35
for more information.
Depending on both your IM service provider and your wireless service provider,
you may not have access to all of the features described in this guide.
To set the required settings for the IM service, see
p. 35. The icons and texts on the display may vary, depending on the IM service.
While you are connected to the IM service, you can use the other functions of the
phone, and the IM conversation remains active in the background. Depending on
the network, the active IM conversation may consume the phone battery faster
and you may need to connect the phone to a charger.
34
Add > Contact.
Contact group and the
Add >
1 audio message received, or
Options to see the
Connect. settings in "Access,"