Panasonic DMR-ES25P Service Manual page 18

DMR-ES25P / DMR-ES25PC
Mode name
I/P Switch
Audio Mute (XTMUTE)
Audio Mute (XDMUTE)
Audio Pattern Output
Laser Used Time
Indiction
Delete the Laser Used
Time
Item
Description
Switch Interlace and Progressive in EE mode.
*Initial setting is "Interlace".
*This command is effective during executing
"White Picture Output", "Magenta Picture
Output" and "RTSC Return in XP (A & V)"
modes.
Check whether mute is applied normally by
the timer microprocessor.
Check whether mute is applied normally by
the Digital P.C.B..
The audio pattern stored in the internal
memory is output
(Lch: 1kHz/-18dB)
(Rch: 400Hz/-18dB)
*Audio sound clock switching operation of
DAC can be confirmed by sub command [2]
[4].
Check laser used time (hours) of drive.
Laser used time stored in the memory of the
unit is deleted.
FL display
Initial mode is Interlace
Switch Interlace/Progressive
Initial mode (Audio 48kHz)
Audio 44.1kHz/48kHz switching
l(*****) is the used time display in
hour.
lLaser used time of DVD/ CD in
Playback/Recording mode
counted.
18
Key operation
(Remote controller key)
Press [1] [4] in I/P Switch mode.
*I/P are switched alternately.
Press [2] [1] in service mode.
Press [2] [2] in service mode.
Press [2] [3] in service mode.
Press [2] [4] in Audio Pattern Output
mode.
*48 kHz / 44.1 kHz are switched
alternately.
Press [4] [1] in service mode.
is
Press [9] [5] in service mode.