Download Print this page

Important Recommendation - TAG Heuer DOCKING GPS – GSM User Manual

Docking gps – gsm

Advertisement

2. Important recommendation

To guarantee the security of your timekeeping, it is necessary to use your CP 540 with the internal
batteries in a charged state
Do not forget to charge the Docking before its use (see « How to charge the Docking »)
If the system is not used for several days, we recommend that you disconnect the Docking from the
Chronoprinter, and remove the batteries from the CP 540.
Do not forget to replace the « red blanking plug into the DOCKING » on the CP 540 to protect its
connector.
Protect the Docking with its original packing.
We recommend you to use the synchronization by GPS between two CP 540, which are
communicating Modem to Modem. The precision is thus guaranteed for your timing.
If you do not wish to use the Synchronization by GPS, please be sure to input the same date and time
on both systems before synchronizing them.
IMPORTANT
It is essential to update the software inside the CP 540 + Docking before initial use.
You will find the software version on our internet site (www.tagheuer-timing.com).
3. Docking connection
Remove the « DOCKING red blanking plug » from the CP 540 which gives access to the docking
connector.
Place the « DOCKING red blanking plug » on the Docking at the reserved position under the female
connector.
Place the CP 540 on the DOCKING and press firmly to ensure a good connection.

Advertisement

loading

This manual is also suitable for:

Docking gps-gsmCp 540