Advertisement
Setting Your Mount's Adjustment Capabilities
The SmartView 300S features a wide-angel swivel joint
and all-directional OmniBall
of your display.
•
The swivel joint enables you to turn your display left
or right 160°.*
•
The OmniBall allows you to pivot your screen any
direction and rotate it 360°.
Before attaching your LCD TV to the four-point TV
mounting plate, you can increase or decrease the
OmniBall pivot action.
1)
Slide the LCD TV mounting plate onto the wall plate as
shown to the right.
2)
By hand, remove the black plastic cap in the center of
the mounting plate, revealing the OmniBall tension nut
(13mm).
3)
With a socket wrench (13mm or 1/2"), turn the tension
nut clockwise to limit pivot and rotation.
4)
Turn the nut counterclockwise to increase pivot
and rotation.
Your mount's wide-angle swivel joint also has an adjustable
tension screw. It can be adjusted before or after your TV
is attached to the TV mounting plate.
1)
Remove the plastic cap on the top of the swivel joint
to access its tension screw.
* Dependent on display size.
12
for fine-tuning the position
™
2)
With the included Allen wrench, turn the tension screw
counterclockwise to reduce tension of swivel.
3)
Turn the screw clockwise to increase tension of swivel.
������� ���
WARNING
DO NOT OVER TIGHTEN SCREWS.
����� ��� ��
�������� �����
���� ���� �����
��������
����������
������ �����
������� �����
13
Advertisement
