JVC HR-XVC32SUJ Instruction Manual page 33

VIDEO STABILIZER When this function is set to "ON," you can automatically correct vertical vibration in the picture
when playing back unstable recordings made on another recorder.
ON
NOTES:
OFF
• When you fi nish viewing a tape, be sure to set this function to "OFF."
• Regardless of the setting, this function has no effect during recording and during special
effects playback.
• The on-screen display may jitter vertically when this function is set to "ON."
• To watch recordings with close-caption, set this function to "OFF."
BLUE BACK
When this function is set to "ON," the TV screen becomes all blue when receiving a channel not
in use.
ON
NOTE:
OFF
When you want to receive an unstable channel with poor signals, set this function to "OFF."
2ND AUDIO RECORD
•
When this function is set to "ON";
If a SAP program is received, the SAP audio is recorded on both the normal and Hi-Fi tracks.
ON
The main audio is not recorded.
OFF
If a non-SAP program is received, the main audio is recorded on both the Hi-Fi and normal
tracks.
•
When this function is set to "OFF"; the SAP audio cannot be recorded.
NOTES:
When the channel is changed on the unit;
• The "STEREO" indicator appears on the screen for about 5 seconds if the program is a stereo
broadcast.
• The "SAP" indicator appears on the screen for about 5 seconds if the program is a SAP
broadcast.
• Both indicators appear when a stereo program is accompanied by SAP sound.
AUDIO MONITOR This unit can record two sound tracks simultaneously (normal and Hi-Fi) on a Hi-Fi stereo tape.
You can select the sound track(s) to listen to while playing back a Hi-Fi stereo tape. In addition,
HI-FI
when playing back a prerecorded tape containing two separate audio programs on the Hi-Fi
HI-FI L
tracks, you can choose either one by selecting either "HI-FI L" or "HI-FI R."
HI-FI R
HI-FI:
NORM
HI-FI L: Sound on the left Hi-Fi channel is played back.
MIX
HI-FI R: Sound on the right Hi-Fi channel is played back.
NORM: Sound on the normal track is played back.
MIX:
NOTES:
• While playing back a monaural tape, sounds on the normal track will be heard regardless of
this setting.
• You can also use the A.MONITOR button on the Remote to select the desired monitor sound.
(☞ pg. 19)
AUTO POWER OFF
When this function is set to "3H," the unit is turned off automatically if no operation is done
within 3 hours. "AUTO POWER OFF IN 3 MIN" appears on the screen 3 minutes before the unit
3H
is turned off.
OFF
Normally select this. Hi-Fi sound is played back.
Both sounds on the Hi-Fi track and normal track are mixed and played back.
33