WaveSense jazz Oweners Manual page 15

IMPORTANT:
[1] Remove the test strip from the blood sample as soon as
you hear the beep.
[2] Do not press the WaveSense Jazz Test Strip against the
test site.
[3] Do not scrape blood onto the WaveSense Jazz Test Strip.
[4] Do not apply blood to the top side of the WaveSense
Jazz Test Strip.
[5] Do not apply blood to the WaveSense Jazz Test Strip
when the test strip is out of the meter.
[6] Do not put blood or foreign objects into the WaveSense
Jazz strip port. Doing so may lead to system failure.
[7] Do not apply more blood after beep.
[8] Carefully read the test results on the display before
making any treatment decisions.
Remove Test Strip from Blood Sample
when you hear the beep: Your meter
will beep once when you should
remove the tip of the WaveSense Jazz
Test Strip from the blood sample.
On the meter display, the droplet
symbol fills to indicate that the blood is
filling the WaveSense Jazz Test Strip.
The scrolling bar and 1-2-3 indicates that
26
Droplet
Symbol:
the meter is calculating your results.
Your test is completed when your blood
glucose test result with time and date is
shown on the display. If the volume is ON,
you will hear a beep. Your test result is
now stored in the memory.
[5] Test Result Mealtime Tagging and
Feedback
If the Mealtime Tag Feature is Enabled: The WaveSense Jazz
Meter allows you to add a tag to your test result. Tagging
results allows you to view averages before and after meals to
see what effect food has on your blood glucose levels.
After your result appears, a tag will flash on the display
suggesting a mealtime tag (Breakfast, Post Breakfast, Lunch,
Post Lunch, Dinner, Post Dinner, and Night). For example,
if you test at 12:30PM, the meter will flash the word "POST
LUNCH."
If the tag is incorrect, you can change it by
pressing the DOWN ( ) or UP ( )
arrow buttons. Pressing the UP ( ) arrow
button would change the tag to Lunch,
pressing the DOWN ( ) arrow button
would change the tag to Dinner. Pressing
the CHECK ( ) button confirms the
mealtime tag and it stops flashing. Your
test result's mealtime tag is now stored in
the memory.
Example of
Mealtime Tag:
POST LUNCH
27