Advertisement
Quick Links
© 2009 Mitek Corporation. All rights reserved. MTX, Thunder, JackHammer and StreetWires are
trademarks of Mitek Corporation. Designed and Engineered in the U.S.A.
Due to continual product development, all specifi cations are subject to change without notice.
MTX Audio, 1 Mitek Plaza, Winslow, IL 61089 U.S.A.
OWNER'S MANUAL
MTX003284 RevA 6/09
21A9241
AW0013198
M T X . C O M
M T X . C O M
Advertisement
Related Manuals for MTX TS9924-22
Summary of Contents for MTX TS9924-22
- Page 1 © 2009 Mitek Corporation. All rights reserved. MTX, Thunder, JackHammer and StreetWires are trademarks of Mitek Corporation. Designed and Engineered in the U.S.A. Due to continual product development, all specifi cations are subject to change without notice. MTX Audio, 1 Mitek Plaza, Winslow, IL 61089 U.S.A.
- Page 2 INTRODUCTION NOTES: Thank you for choosing MTX to help you reach your ultimate goal with your vehicle. The MTX JackHammer is a true 24" subwoofer with power and performance beyond anything ever designed in the mobile audio world. This behemoth, is capable of handling up to 4,000 watts of RMS power, and was designed for those enthusiasts that want to show off the biggest square woofer ever made.
-
Page 3: Before Starting
BEFORE STARTING It is very important that you have your JackHammer installed by an authorized MTX retailer, that is preferably MECP certifi ed. Before installation, make sure you have read the instructions carefully and have the following equipment: • Fork Lift (or another means of lifting approximately 370 lbs.) •... - Page 4 RECOMMENDED ENCLOSURE REQUIREMENTS PISTON CHANGE (RE-CONE KIT) For Sealed Enclosures Since the installation of the JackHammer is a large investment in time and resources, the cone can be removed The JackHammer requires a volume of 5.47 cubic feet (net) per woofer. The woofer’s displacement is without removing the entire sub or enclosure.
-
Page 5: Wiring Options
MOUNTING WIRING OPTIONS Mounting the TS9924-22 JackHammer is nothing that can be taken lightly, quite literally. You need to follow the Often overlooked, the installation components used to connect the entire system need to match the maximum steps below carefully and have all the necessary equipment. You will need to be able to lift the nearly 400 lbs.