Page 1
Callisto LINE STAGE Aesthetix Audio Corporation 5220 Gabbert Rd. Suite A Moorpark, CA. 93021 Phone: (805) 529-9901...
Page 2
PLACEMENT The Callisto main unit should be located away from possible sources of hum such as power cords, power transformers and the like. It should not be located on top of its own power supply or any other heat source such as a power amplifier.
Page 3
D. Connect female end of the same umbilical cable to the remaining male receptacle on the main unit. E. Connect sources to Callisto using either RCA or XLR connectors. F. Connect Callisto to the power amplifier using either RCA or XLR connectors. G. Ensure that the power amplifier is turned off.
TECHNICAL DESCRIPTION NOTE: The following is a detailed technical description of the circuitry employed in Callisto. It is intended for technically inclined readers for informational purposes only. Callisto comprises two separate units, the Linestage stage itself and the power supply unit. The units are connected together via two detachable umbilical cords.
Page 5
Aesthetix. The product must be packed and returned to Aesthetix by the customer at his or her sole expense. A returned product must be accompanied by a written description of the defect and a photocopy of the original purchase receipt.
Need help?
Do you have a question about the Callisto and is the answer not in the manual?
Questions and answers