1. Manuals
  2. Brands
  3. Eximus Manuals
  4. CD Player
  5. CD10
  6. Owner's manual

Eximus CD10 Owner's Manual

Cd10 24 / 192 cd player & d/a converter
Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

CD10
24 / 192 CD PLAYER & D/A CONVERTER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CD10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Eximus CD10

  • Page 1 CD10 24 / 192 CD PLAYER & D/A CONVERTER...
  • Page 2 CD players. Intended for 2-channel reproduction, the CDA200 will compete favorably against, and even surpass, the performance of the latest available digital formats. The EXIMUS CD10 is designed to operate at the following line voltages; 117, 230(220), 240 volts AC. This proper voltage is selected through internal CAUTION voltage selector switches.

  • Page 3: Digital Inputs

    CD, each recording. Digital Inputs The digital input section of CD10 consists of 1 Coaxial and 2 Toslink. Connected to any of these three inputs, DVD, LD, MD or any component with digital output up to 24Bit/96kHz can be upsampled to 24Bit/192kHz.

  • Page 4: Digital To Analog Converter

    The balanced and the unbalanced outputs can be connected simultaneously. To use the CD10 as a dedicated CD transport uses the Digital Output section. The signal output can be directed to an external D/A converter or a digital recording apparatus. The use of a top quality digital, coaxial or Toslink cable is highly recommended for this application (Consult your local dealer for recommendations).
  • Page 5 CD Player CONNECTION Fig. 2] The Front Panel Fig. 3] The Display Window DISC PLAY STOP PAUSE TRACK REPEAT STANDBY Turn on 'Mains' power switch located on the rear panel. Red LED above the 'STANDBY' switch will begin to glow. Turn on the unit by pressing the 'STANDBY' button once.
  • Page 6 EXIMUS CD10 CD PLAYER & D/A CONVERTER Caution Before you use, please, unscrew two yellow bolts located under the bottom of the product. Two yellow bolts were placed to protect the mechanism of the unit during the transfer. If you do not unscrew two yellow bolts at the bottom, the unit will not work.

  • Page 7: Specifications

    CD PLAYER / DAC SECTION SPECIFICATIONS Transport Mechanism Philips Pro2M Format Audio CD (CD-DA), CD-Recordable (CD-RW) Input Data 16 to 24Bits/32 to 96 kHz Automatically Locked Upsampler Bypass, 96 kHz, 192 kHz Selectable 24/192 Delta-Sigma Digital to Analog Converter Dynamic Range 127 dB Type Signal-to-Noise Ratio 127 dB Type...

Table of Contents