Advertisement
CHARGING THE KEYBOARD
1. Plug the USB charging cable (included) into the charging outlet and into a USB
outlet (see the illustration below for part locations).
2. The LED will illuminate in red during charging, and shut off when charging is
complete.
3. The keyboard takes approximately 1.5 hours to charge for up to 280 hours of use.
Note: The charging LED indicator will blink when your Bluetooth
Case's battery is low and needs to be recharged.
5
Charging LED
®
Bluetooth
LED
Caps Lock LED
Charging Outlet
®
Keyboard
SYNCING THE BLUETOOTH
iPad Tablet
1. Power on your iPad.
2. Press the Power button on the Bluetooth
off after a few seconds.
3. Press the Fn+
on the Bluetooth
®
Keyboard, the Blue LED will fash.
4. Select the "Settings" icon on your iPad Tablet's screen.
5. Locate and select "Bluetooth" in your iPad Tablet's "General" menu.
6. Under "Devices" on your iPad Tablet, selcet the Brookstone Bluetooth
7. The iPad Tablet screen should now show the Brookstone Bluetooth
has connected successtully.
8. If your iPad Tablet goes into standby mode, the Bluetooth
still be synced. If you power-off your iPad Tablet you may need to re-sync. If you
®
use the Bluetooth
Keyboard with a new iPad Tablet, or it doesn't connect
properly, follow the setps above to re-sync.
Note: The Bluetooth
®
Keyboard will automatically go into standby mode
after 15 minutes of inactivity in order to preserve battery life. Just press any
key to reactivate the keyboard.
®
KEYBOARD TO YOUR
®
Keyboard. The Blue LED will shut
®
Keyboard.
®
Keyboard
®
Keyboard should
6
Advertisement
