Important Safety Precautions And Explanation Of Symbols - Emotiva ERC-3 User Manual

Important Safety Precautions and Explanation of Symbols

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
!
installation, operation, and service instructions in this manual.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltages within the enclosure that may be of sufficient magnitude to
constitute a risk of electrical shock to the user.
Please read this manual thoroughly before attempting to install, configure, or operate the Emotiva ERC-3.
After successful installation and configuration of the ERC-3, be sure to retain this manual in a safe place for
future reference.
Safety is a key component to a long lasting and trouble free installation. Please read and follow all
instructions and heed all warnings on the ERC-3 and in this manual. The vast majority of the subsequent
safety precautions are common sense. If you are not comfortable with the installation of audio/video
entertainment equipment, you should seek the services of a qualified installation professional or call us for
help.
WARNING: To REDUCE ThE RIsk of fIRE oR ElECTRIC shoCk, Do NoT UsE ThE ERC-3 NEAR WATER
!
oR IN WET loCATIoNs, Do NoT ExposE IT To RAIN oR moIsTURE, Do NoT ExposE IT To DRIppING
oR splAshING fRom oThER soURCEs, AND ENsURE ThAT No oBJECTs fIllED WITh lIQUIDs (sUCh
As VAsEs) ARE plACED oN IT. DoING so mAy REsUlT IN DAmAGE To ThE ERC-3 AND ThE RIsk of
ElECTRIC shoCk, WhICh mAy REsUlT IN BoDIly INJURy oR DEATh.
WARNING: To REDUCE ThE RIsk of ElECTRIC shoCk, Do NoT REmoVE ThE CoVER fRom ThE
ERC-3. ThERE ARE No UsER-sERVICEABlE pARTs INsIDE ThE ERC-3. REfER All sERVICE To QUAlIfIED
sERVICE pERsoNNEl.
Do not install the ERC-3 near or above any heat sources such as radiators, heating vents, or other apparatus
that produces heat. Do not block any ventilation openings or heat sinks. Avoid installing the ERC-3 directly
above other heat-producing equipment unless sufficient ventilation or forced-air cooling is provided.
Do not install the ERC-3 in locations without proper ventilation. The ERC-3 should not be operated on a bed,
sofa, rug, or similar surface that may block vents. The ERC-3 should not be installed in an enclosed location
such as a bookcase, cabinet, or closed equipment rack unless sufficient ventilation is provided.
Always install your ERC-3 according to the manufacturer's instructions and only use attachments or
accessories specified by the manufacturer.
Do not install the ERC-3 on any stand, shelf, or other piece of furniture that is unable to support its weight.
If a cart is used to move the ERC-3, use caution to avoid injury from tip-over.
Connect the ERC-3 only to power sources of the correct voltage (as shown in this manual and on the ERC-3).
Protect power supply cables from being pinched, walked on, or otherwise damaged. Be especially careful
where the power cable enters the power outlet and the ERC-3 unit.
Only connect the ERC-3 to an electrical outlet or extension cord of appropriate type and rating.
DO NOT defeat the safety purpose of a grounding or polarized plug by removing ground pins or using unsafe
adapters. A polarized plug has two blades - one wider than the other. A grounding plug has a third ground
prong in addition to the two main conductors. The wide blade or third groundling prong is provided for your
safety. If the provided plug does not fit your outlet, consult an electrician to replace your obsolete outlet. If
you replace the ERC-3 power cord, only use one of similar type and equal or greater current rating.