Gigabyte GV-N84S-512l User Manual page 10

Step 4.
To connect an HDMI TV, follow the steps below to enable the S/PDIF in function for the graphics card.
1. 2.
Connect the provided S/PDIF cable to the graphics Connect the S/PDIF cable to the motherboard,
card. (the red wire connects to the S/PDIF out pin and
the black to the Ground pin)
You are now ready to proceed with the installation of the graphics card driver. Please refer to next
chapter for detailed instructions.
GV-N84S-512I Graphics Accelerator
—
- 11 -