Sirius Satellite Radio RETROFIT KIT Installation Instructions Manual
Sirius Satellite Radio RETROFIT KIT Installation Instructions Manual

Sirius Satellite Radio RETROFIT KIT Installation Instructions Manual

For bmw x3 without navi

Advertisement

Installation Instructions

Audio, Satellite Radio
These installation instructions supercede all previous versions
SUBJECT
SIRIUS RETROFIT KIT FOR X3 WITHOUT NAVI - P/N 84 11 0 390 240
MODEL
X3 (E83):
Select Vehicle Production 12/03 – On*
* Vehicle must have Satellite Radio Preparation (SA693) and no Navigation system.
SUGGESTED INSTALLATION TIME:
**Additional Installation time may be necessary for installation of 6-Disc CD Changer together with Satellite
Radio, please refer to page 4.
The instructions below are developed for BMW vehicles and are not be compared to any other existing
instructions for vehicles other than BMW. No methods other than those specified in this document are to be
used for installation in BMW vehicles. Left and right are determined from driver's seat.
Carefully read all instructions and supplements before proceeding with the installation. Reference should be
made to TIS for instructions dealing with a stock part of the vehicle but not stated in detail in these instructions.
The instructions were complete and up to date at time of publication; however, changes to the vehicle or
installation may have occurred. Please report any problems or changes noted with the installation to BMW
Technical Hotline, along with VIN, date of manufacture and as much detail as possible.
DO IT RIGHT THE FIRST TIME, ON TIME, EVERY TIME
Installation Instruction P/N 01 29 0 392 564
© 2007 BMW of North America, LLC
0.75 HOURS **
Page 1 of 7
June 2007
Ver. 3.0
Accessory
Development

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RETROFIT KIT and is the answer not in the manual?

Questions and answers

Summary of Contents for Sirius Satellite Radio RETROFIT KIT

  • Page 1: Installation Instructions

    Accessory Development These installation instructions supercede all previous versions SUBJECT SIRIUS RETROFIT KIT FOR X3 WITHOUT NAVI - P/N 84 11 0 390 240 MODEL X3 (E83): Select Vehicle Production 12/03 – On* * Vehicle must have Satellite Radio Preparation (SA693) and no Navigation system.
  • Page 2 PARTS INFORMATION 84 11 0 390 240 Contents of Kit – P/N Description BMW Part Number Sirius Bracket Screw (M4x6) 07 11 9 901 061 Clip Nut M6 41 35 7 060 601 Bolt M6x13 51 34 1 950 474 Antenna Connector (Curry) 65 12 0 397 740 ADDITIONAL PARTS (that may be required)
  • Page 3 Procedure: 1. Disconnect vehicle battery. 2. Remove felt covers from 3 mounting points (1) and insert clip nuts in these 3 locations. 3. Locate Sirius connectors wrapped inside insulation padding (2). Remove connectors from padding and save padding for a later step. 4.
  • Page 4 7. Remove safety clip from Sirius antenna connector (1), using a small flat head screwdriver (2) depress release tab (3) and pull out Sirius antenna cable (4). 8. Insert Sirius antenna cable into new Curry colored Sirius antenna connector P/N 65 12 0 397 740.
  • Page 5 13. Re-install radio and re-assemble vehicle. 14. Re-connect vehicle battery. Installation Complete. Go to Activation Procedure outlined on last page. For vehicles with CD Changer and without DSP audio system: 15. Remove center console following instructions available through TIS. Remove CD Changer. 16.
  • Page 6 RETROFIT CODING There is no retrofit coding required for this installation. For installation of CD changer in X3 vehicles, please refer to vehicle coding procedure outlined in CD Changer Retrofit Installation Instructions 01 29 0 306 160. Installation Instruction P/N 01 29 0 392 564...
  • Page 7 Step 4: Press the “MODE” button repeatedly until SIRIUS Satellite Mode is activated. “SIRIUS” will be displayed. Step 5: The receiver will now try to find any available SIRIUS Satellite Radio signal. “ACQUIRING” may flash in the display until a channel is found.

Table of Contents