Advertisement
HD Digital Indoor Antenna
MODEL: ST-A1500
Designed to enhance HDTV signal reception
Congratulations on your purchase of the HD Digital Indoor Antenna. Your satisfaction is
very important to us. Before your installation, please ready this manual carefully and keep
this manual for further information.
ST-A1500 is a specially designed antenna for the reception of HD/SD digital terrestrial TV
broadcasting. HD (High Definition) TV broadcasting is now broadcasted on air in digital
format. HD signals require more stable signal reception and better antenna matching
design than non-HD signals. Not only is the ST-A1500 equipped with hardware for stable
reception and improved antenna matching, it also has a built-in low noise amplifier (LNA)
to provide the best digital reception. The stylish housing design will make the antenna fit
with your HDTV and digital home cinema perfectly.
Features:
VHF/UHF reception
Frequency range: VHF: 47~230 MHz; UHF: 470~870MHz
Amp. Gain: VHF: 20 ± 3dB / UHF: 17
Low Noise Amplifier technology (NF < 2dB)
Stylish housing design
Wall mounting capable
Before installation, please check that you have all contents:
1. Antenna (cable attached)
2. Wall mount kit (hook, screws, anchor bolts)
3. Stand
Antenna
INTRODUCTION
3dB
PACKAGE CONTENT
Hook
Anchor Bolts
1
Screws
Stand
Advertisement
Table of Contents
Summary of Contents for Satechi ST-A1500
- Page 1 INTRODUCTION ST-A1500 is a specially designed antenna for the reception of HD/SD digital terrestrial TV broadcasting. HD (High Definition) TV broadcasting is now broadcasted on air in digital format. HD signals require more stable signal reception and better antenna matching design than non-HD signals.
- Page 2 INSTALLATION Powering the antenna (1) Take out the ST-A1500 antenna unit and check the accessories. (2) Connnect the F connector to the antenna input of your Digital TV. (3) Connect USB plug to the TV USB port to get 5V of power.
- Page 3 2. Wall Mounted installation: *Please note, when you using an electric drill, wear protective eye glasses. - Use a drill bit to drill 35mm deep holes to align with the hook. - Use a hammer to insert the plastic screw anchors into the holes. - Use a screw driver to fix into the plastic anchors.
- Page 4 NOTICE For best reception: 1. Keep the antenna away from sources of interference, especially from large-power consuming devices such as air conditioners, elevators, hair dryers, microwaves, etc. 2. Install at an elevated level to avoid any terrestrial signal interference. 3. Place the antenna near windows when using it indoors, unless the window or window screen contains metal which will interfere with signal reception.
Need help?
Do you have a question about the ST-A1500 and is the answer not in the manual?
Questions and answers