Operating Instructions - Optex Universal Battery Charger Manual

OPERATING INSTRUCTIONS

This section explains how to power the charger, load a battery onto the
charger, and charge it.
Adjusting Position of Contacts for Charging
Before battery can be inserted into the charging bay and charged,
•
the contact terminals of the charger must be properly adjusted
accommodate your battery.
Adjust horizontal position for contacts by sliding the Left and Right
•
Contact Adjusters until they are properly aligned with your battery's
positive and negative terminals.
Depending on the location of your battery's charging terminals you
•
may need to adjust the vertical position of the charger contacts. You
can do this by turning the adjusting dial until the proper height is
achieved.
Note: The LI5000 has built in reverse polarity detection software.
•
This ensures full and safe charging for each and every charge.
Should you by chance insert the battery in reverse polarity (the
positive contact is on the negative side of the battery, and vice versa),
the unit will detect and automatically adjust itself to ensure a full and
safe charge.
Contact Adjusters
Adjusting Dial