Split Point; Pedal Assign; Fade In; Fade Out - Farfisa TK95 Owner's Manual

Other Functions

Split Point

This function sets the point that separates the entire keyboard to
two sections.
1.
The LCD displays split point value. Use [+/YES]/[-/NO] or Data
Dial to change split point. The keyboard can also be used to
change split point.
2.
The part below the split point is the part of the chord area.

Pedal Assign

This function sets pedal type as sustain pedal, soft pedal,
start/stop pedal or memory select pedal.
1.
The LCD displays the type of pedal. Use [+/YES]/[-/NO] or Data
Dial to change pedal assign. The pedal can be set as sustain
pedal, soft pedal, start/stop pedal or memory select pedal.
2.
The default pedal type is sustain pedal.

Fade In

The LCD displays Fade In value. Use [+/YES]/[-/NO] or Data Dial to
change Fade In time. The range is form 1 to 20 second.

Fade Out

The LCD displays Fade Out value. Use [+/YES]/[-/NO] or Data Dial
to change Fade Out time. The range is form 1 to 20 second.
28
S p 1 i t P t
P e d S o f t
F a d e I n
F a d e O u t
100
95
75
25
5
0