Advertisement
STEP 1 Radio Removal
a. Unsnap vent panels on either side of radio using plastic
trim removal tool.
b. Remove (10) phillips screws from radio/AC panel.
c. Pull radio/AC assembly out, unplug harness connectors
and remove.
STEP 2 Installing the FM Modulator
a. Attach FM modulator to bottom of lower plastic
cross brace using two 11'' wire ties.
b. Plug male car antenna lead into female antenna
lead on FM modulator and wrap connection with felt.
CAUTION: Use plastic trim removal tool to prevent damage or scratches to vent panels.
FM Modulator
d. You should have a clear view of the dash cavity.
Hyundai Factory Radio Harness Connector
NOTE: Be sure to test with a Multi-Meter
to verify.
+12v Red Power Wire
c. Use 3M Scotch Lock to splice Red wire into the factory
radio harness Green with Black stripe wire.
4
/05
/
7 0
Green/ Black
Stripe
3M Scotch
Lock
a P
e g
2
of
4
Advertisement
